Welcome to visit Changzhou Runhua Electric Co., Ltd. Official website!
TEL

0086-519-82305398

Current location:Home > News > Technical Support
NEWS

Runhua Multi-purpose Oscillator Technology Upgrade

Information sources: | Release date: 2019-12-10 15:50:24 | Browse volume:146

Introduction of Runhua Multi-purpose Speed Control Oscillator:

The multi-purpose speed-adjustable oscillator is widely used in laboratories of universities and colleges, environmental protection, scientific research, health, epidemic prevention, petroleum, chemical and other units. It has the characteristics of generous appearance, large capacity, low noise, light weight, and small size. Adjustable and equipped with a timing device, it is an ideal and necessary tool for laboratory staff.

Multi-purpose speed-regulating oscillator performance:

1: Power supply: AC 220V 50Hz
2: Motor power: 100W
3: Stepless speed regulation: 0-300 times/min
4: Oscillation amplitude: reciprocating 20mm
5: Timing: 120 minutes maximum
6: Digital display with speed 0-300 rpm

How to use multi-purpose speed oscillator:
1: First, put the container (bottle) to be shaken into the spring of the oscillation disc. The solution in the container should not exceed one third of the container, otherwise it must be stoppered.
2: Check the timing knob and turn it to the ON (normally open) position or the time position you need to specify.
3: Turn the speed control knob counterclockwise to the lowest speed position, turn on the power switch, the power indicator light is on, and then turn the speed control knob clockwise to the speed you need.

Precautions for multi-purpose speed regulating oscillator:
1: This multi-purpose speed-adjustable oscillator uses a three-eye safety socket, which must be properly connected to the ground when using it.
2: When working, the machine should be placed on a flat and firm table to prevent vibration.
3: The clamp spring is only used for fixing small and medium volumetric flasks. For extra-large containers, a few springs should be removed or other methods should be adopted for reinforcement.
4: The machine should be turned off after use, placed in a dry and ventilated place, and keep it clean.

 
2. Technical indicators:

   Model index

HY-1

HY-2

HY-3

HY-4/KS

   range of rotation

Starting—300rpm/min

Starting—360rpm/min

Starting—300rpm/min

Start-300rpm/min

   Vibration amplitude

20mm

20mm

20mm

20mm

   Timing range

0—120min (normally open)

0—120min (normally open)

0—120min (normally open)

0—120min (normally open)

   Dimensions

510×480×300

520×300×240

750×500×330

440×300×240

Related articles
Related products

Copyright 2020 Changzhou Runhua Electric Co., Ltd. Copyright Design by:EastNet [Manage]
Top