Welcome to visit Changzhou Runhua Electric Co., Ltd. Official website!
TEL

0086-519-82305398

Current location:Home > News > Technical Support
NEWS

What work should be done in the use of digital display stainless steel electric heating plate?

Information sources: | Release date: 2020-05-29 15:47:15 | Browse volume:39

What work should be done in the use of digital display stainless steel electric heating plate?
    Digital display stainless steel electric heating plate is widely used for baking, drying and other temperature tests of samples. It is an indispensable tool for biology, genetics, medicine and health, environmental protection, biochemical laboratory, analysis room, teaching and research, then use digital display stainless steel electric heating What work should be done in the board? Let's take a look together below:
    (1) Check the lubrication condition of each part of the digital display stainless steel electric heating plate, and make all the lubricating electricity fully lubricate;
    (2) Check whether the digital display stainless steel electric heating plate is installed correctly and reliably;
    (3) Check whether the compressed air pressure is within the specified range;
    (4) The flywheel and clutch must be disconnected before the motor can be turned on;
    (5) When the digital display stainless steel heating plate motor is started, check whether the flywheel rotation direction is the same as the rotation mark;
    (6) Let the press perform several idle strokes to check the working conditions of the brake, clutch and operating parts.
    Digital display stainless steel electric heating plate operation steps
    1. Wipe clean the working surface of the digital display stainless steel heating plate, and there should be no water droplets or dirt on it.
    2. Place the sample bottle or other utensils.
    3. Turn on the power and close the power switch. The indicator light is on and the electric heating plate is in working condition.
    4. Adjust the temperature control knob to rise to the required temperature. When the digital display stainless steel electric heating plate is in working condition, there should be someone to take care of it.
    5. After finishing the work, turn off the power switch. Cut off the power.

Related articles
Related products

Copyright 2020 Changzhou Runhua Electric Co., Ltd. Copyright Design by:EastNet [Manage]
Top