The function and characteristics of Runhua gas bath constant temperature oscillator and precautions for use

One: Product introduction of gas bath constant temperature oscillator
 Multifunctional gas bath constant temperature oscillator (also known as air constant temperature shaker) is a temperature controllable constant temperature air box and oscillator
The combined biochemical instrument is an indispensable laboratory equipment for precision cultivation and preparation in scientific research, education and production departments such as plants, biology, microorganisms, genetics, viruses, environmental protection, and medicine.
Its main features: (1) Precise temperature control and digital display; (2) Oxygen supplement holes are provided; (3) Mechanical timing is provided; (4) Universal spring test bottle rack is particularly suitable for biological samples for various comparison tests Culture preparation; (5) Stepless speed regulation, stable operation, simple and safe operation.

Two: (digital display) gas bath constant temperature oscillator technical indicators
1. Please read this manual carefully before use.
2. The working plane of the machine should not be excessively smooth (such as tiles, etc.).
3. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and have good grounding measures.
4. It is strictly forbidden to use the whole machine in an environment exposed to direct sunlight.
5. Speed regulation should start slowly from low speed to high speed.
6. The machine may shift to some extent during high-speed oscillation, so it should be supervised during use.

Three: (digital display) gas bath constant temperature oscillator instructions
1. Load the test bottle and keep the balance. If it is a dual-function model, set the oscillation mode. (See the last picture for detailed settings)
2. Turn on the power and set the timing time according to the scale on the surface of the machine. If you need to work for a long time, set the timer to the "normally open" position.
3. Turn on the power switch and set the constant temperature:
(1) Put the small control switch in the "setting" section, the temperature displayed on the display is the set temperature at this time, adjust the knob and set it to the temperature you need for work. (The working temperature you set should be higher than the ambient temperature, at this time the machine starts to heat up and the yellow indicator light is on, otherwise the machine will not work)
(2) Put the small switch of the control part on the "measurement" end, and the temperature displayed on the display is the actual temperature of the air in the test chamber. As the temperature in the chamber changes, the displayed number will change accordingly.
(3) When the heating reaches the temperature you need, the heating will automatically stop and the green indicator light will be on; when the heat in the test chamber is dissipated and is lower than the temperature you set, a new round of heating will start again.
4. Turn on the oscillating device:
(1) Turn on the oscillation switch on the control panel, and the indicator light is on.
(2) Adjust the oscillation speed knob to the desired oscillation frequency.
5. Cut off the power after work, set the speed control knob and temperature control knob to the lowest point.
6. Clean the machine and keep it clean.

Four: (digital display) air bath constant temperature oscillator matters needing attention
1. The appliance should be placed on a firm work surface, the environment should be clean and tidy, and well ventilated.
2. The power socket provided by the user should have good grounding measures.
3. It is strictly forbidden to move the machine during normal work.
4. Objects are strictly prohibited to hit the machine.
5. Children are strictly prohibited from approaching the machine to prevent accidents.
6. Before replacing the fuse, make sure that the power supply is cut off.
7. Please clean up the machine after use, and no water droplets or dirt residues should remain.

The gas bath constant temperature oscillator (air shaker) is a biochemical instrument that combines a temperature-controllable incubator and an oscillator. The temperature control adopts an intelligent integrated circuit, the setting is drift-free, and the LED display is intuitive and accurate. This series of products are widely used in laboratories such as environmental protection, medical treatment, sanitation and epidemic prevention, animals and plants, and food engineering.

2. Details of the gas bath constant temperature oscillator: