The winning product of Runhua Company is the SHA-B multifunctional water bath constant temperature oscillator. The instrument has multiple functions. The specific parameters are as follows:
Details of SHA-B water bath constant temperature oscillator:
1. Overview
Digital display water bath constant temperature oscillators are widely used in medical, petrochemical, sanitation and epidemic prevention, environmental monitoring, soil analysis and other scientific research departments for biological, biochemical, cell, bacterial and other fluid and solid compounds. This machine has the characteristics of reasonable structure, simple operation and high stability. It is an ideal equipment for experimenters.
2. Main technical parameters
Model SHA-B
Working power supply 220V50HZ
Overall power 1880W
Timing range 0～120 minutes optional
Vibration amplitude 20mm
Constant temperature range: room temperature -100℃±0.5℃
Oscillation frequency start ~ 300 times/min
Temperature fluctuation ±0.1℃
Working way back and forth
Note: Type A is speed digital display
3. How to use
First of all, please remove the stainless steel cover of the oscillator and add water to the water tank. The amount of water added is controlled according to the needs of the experiment, but at least the water level should be higher than the heating tube to prevent the heating tube from burning out. Generally, it is better to add 2/3 of the water tank. , The water will overflow during shaking and affect the experiment. Then put the sample to be shaken in a beaker or flask on the spring clamp, turn on the power, turn on the power switch, turn on the timer to normally closed "ON" or you need When the time is set, the indicator light is on, indicating that the power supply in the machine has been turned on, and the oscillation frequency is controlled by the speed control knob, which is adjusted from low speed to high speed from left to right.
Set temperature: press the SET key to set or view the temperature set point, press the SET key once and the digital tube character starts to flash, indicating that the instrument enters the setting state, press the Δ key to increase the setting value, and press the ▽ key to decrease the setting value Small, long press the Δ key or the ▽ key, the data will change quickly, and again the SET key will return to the normal working state and the temperature setting is complete. When the set temperature is lower than the ambient temperature, please turn on the cooling switch.
Four, matters needing attention
1 The case of the instrument should be properly grounded to avoid accidents
2 All kinds of liquids are strictly prohibited to enter the machine to avoid damage to the host
3 When not in use, the power should be cut off, and the dry water tank should be placed in a ventilated and dry place.
