Changzhou Runhua high-quality supply DF-II heat-collecting thermostatic magnetic heating stirrer

Using high-quality DC brushless motor, low noise, stable speed regulation, fully enclosed heating plate can be used for auxiliary heating. The thermostatic magnetic stirrer can set the greenhouse and greenhouse display, can be used for long-term heating, and the digital display is intuitive and accurate. The arc-shaped stirrer made of polytetrafluoroethylene and high-quality magnetic steel is resistant to high temperature, abrasion, chemical corrosion, strong magnetism, and can be mixed in a closed container. It is ideal and convenient to use.

Description of heat-collecting magnetic stirrer:

 Adopt high-quality DC motor, low noise, stable speed regulation, fully enclosed heating plate can be used for auxiliary heating. The thermostatic magnetic stirrer can set the greenhouse and greenhouse display, which can be used for long-term heating, and the digital display is intuitive and accurate. The mixer is made of polytetrafluoroethylene and high-quality magnetic steel. It is resistant to high temperature, abrasion, chemical corrosion, strong magnetism, and can be mixed in a closed container. It is ideal and convenient to use.

1. Introduction to the heat-collecting magnetic heating stirrer

The heat-collecting magnetic heating stirrer is widely used in various universities, environmental protection, sanitation, epidemic prevention, petroleum, chemical, medical and other units. This instrument has good performance, no noise, no vibration, and fast heating. It is an ideal and necessary tool for experimenters.

2. Performance of heat-collecting magnetic heating stirrer

1. Power supply: single-phase AC 220V±10V 50HZ

3. Mixing power: 80W

4. Heating power: 600W

5. Stepless speed regulation: starting ~ 2400 rpm

6. Temperature control range: RT-300℃. Accuracy ±0.5℃

7. Temperature fluctuation: ≤0.5℃

 Third, the use method of type heat collecting magnetic heating stirrer

1. The power supply and the cup are ready, open the lid of the stainless steel container, place the cup in the middle of the stainless steel container, add heat transfer oil or silicone oil to the stainless steel container to an appropriate height, and put the stir bar into the cup solution. Turn on the power switch, the indicator light is on, and the speed control potentiometer is rotated in a clockwise direction. The speed is simple and convenient from slow to fast. Adjust to the required speed.

2. When heating, connect the temperature sensor probe, clamp the probe on the bracket, move the bracket so that the temperature sensor probe is inserted into the solution not less than 5 cm, but it cannot affect the stir bar.

3. Turn on the power switch. After about 1 minute, the upper row of red digits will display 400, and the lower row will display 0.0. After 30 seconds of inactivity, the upper row will display the current water temperature, press the /SET button, the upper row will display SP, press ▲ or ▼ key to make the lower row display the required set temperature, press the /SET key again, the upper row displays ST, still press the /SET key to return to the actual temperature displayed on the upper row, at this time, wait After a few seconds, the smart watch starts to remember.

If you want to change the parameters of the smart meter, such as resetting a higher temperature (or the original setting error is too large) If you want to change the parameters of the smart meter, such as resetting a higher temperature (or the original setting temperature) The error is too large), you need to press the /SET key, the upper row displays SP, press the ▲ or ▼ key to make the lower row display the required temperature, then press the /SET key, the upper row displays ST, still press the /SET key, up The row shows the actual temperature. At this time, after pressing the /AT button for 20 seconds, the RUN light flashes, and the meter starts auto-tuning, and it will automatically go back and forth (referring to stop heating when the temperature is automatically raised to the set temperature, and start heating when the temperature is lower than the set temperature) twice After the self-adjustment is over, the RUN indicator will go out, and the meter will get a set of parameters that will never change to overcome the over-temperature. You need to press the /SET key, the upper row displays SP, press the ▲ or ▼ key, the lower row displays the temperature that needs to be set.

4. If the stirrer jumps during work, please turn off the power and turn it on again, and adjust the speed from slow to fast to restore normal production.


Fourth, the precautions for the heat-collecting magnetic heating stirrer

1. To ensure your personal safety, please use a three-phase safety socket, which must be properly grounded during use.
2. The heating time is generally not too long, intermittent use can extend the life. It can work continuously for 8 hours at medium speed and 4 hours at high speed.
3. Please do not turn on the temperature control switch when the stainless steel container is not filled with thermal oil and when the temperature sensor is not connected to avoid damage to the electric heating tube and the thermostat.
4. Please read the manual carefully before using this instrument to avoid unnecessary trouble.
5. If it is not used for a long time, please wipe it clean and place it in a dry and ventilated place.
6. The company's products are guaranteed for one year and lifelong maintenance. (Improper use or man-made damage will be charged for the cost) Please rest assured to use high-quality DC brushless motor, low noise, stable speed regulation, and fully enclosed heating plate can be used for auxiliary heating. The thermostatic magnetic stirrer can set the greenhouse and greenhouse display, can be used for long-term heating, and the digital display is intuitive and accurate. The arc-shaped stirrer made of polytetrafluoroethylene and high-quality magnetic steel is resistant to high temperature, abrasion, chemical corrosion, strong magnetism, and can be mixed in a closed container. It is ideal and convenient to use.

Description of heat-collecting magnetic stirrer:

Adopt high-quality DC motor, low noise, stable speed regulation, fully enclosed heating plate can be used for auxiliary heating. The thermostatic magnetic stirrer can set the greenhouse and greenhouse display, can be used for long-term heating, and the digital display is intuitive and accurate. The mixer is made of polytetrafluoroethylene and high-quality magnetic steel. It is resistant to high temperature, abrasion, chemical corrosion, strong magnetism, and can be mixed in a closed container. It is ideal and convenient to use.

1. Introduction to the heat-collecting magnetic heating stirrer

The heat-collecting magnetic heating stirrer is widely used in various universities, environmental protection, sanitation, epidemic prevention, petroleum, chemical, medical and other units. This instrument has good performance, no noise, no vibration, and fast heating. It is an ideal and necessary tool for experimenters.

2. Performance of heat-collecting magnetic heating stirrer

1. Power supply: single-phase AC 220V±10V 50HZ

3. Mixing power: 80W

4. Heating power: 600W

5. Stepless speed regulation: starting ~ 2400 rpm

6. Temperature control range: RT-300℃. Accuracy ±0.5℃

7. Temperature fluctuation: ≤0.5℃

Third, the use method of type heat collecting magnetic heating stirrer

1. The power supply and the cup are ready, open the lid of the stainless steel container, place the cup in the middle of the stainless steel container, add heat transfer oil or silicone oil to the stainless steel container to an appropriate height, and put the stir bar into the cup solution. Turn on the power switch, the indicator light is on, and the speed control potentiometer is rotated in a clockwise direction. The speed is simple and convenient from slow to fast. Adjust to the required speed.

2. When heating, connect the temperature sensor probe, clamp the probe on the bracket, move the bracket so that the temperature sensor probe is inserted into the solution not less than 5 cm, but it cannot affect the stir bar.

3. Turn on the power switch. After about 1 minute, the upper row of red digits will display 400, and the lower row will display 0.0. After 30 seconds of inactivity, the upper row will display the current water temperature, press the /SET button, the upper row will display SP, press ▲ or ▼ key to make the lower row display the required set temperature, press the /SET key again, the upper row displays ST, still press the /SET key to return to the actual temperature displayed on the upper row, at this time, wait After a few seconds, the smart watch starts to remember.

If you want to change the parameters of the smart meter, such as resetting a higher temperature (or the original setting error is too large) If you want to change the parameters of the smart meter, such as resetting a higher temperature (or the original setting temperature) The error is too large), you need to press the /SET key, the upper row displays SP, press the ▲ or ▼ key to make the lower row display the required temperature, then press the /SET key, the upper row displays ST, still press the /SET key, up The row shows the actual temperature. At this time, after pressing the /AT button for 20 seconds, the RUN light flashes, and the meter starts auto-tuning, and it will automatically go back and forth (referring to stop heating when the temperature is automatically raised to the set temperature, and start heating when the temperature is lower than the set temperature) twice After the self-adjustment is over, the RUN indicator will go out, and the meter will get a set of parameters that will never change to overcome the over-temperature. You need to press the /SET key, the upper row displays SP, press the ▲ or ▼ key, the lower row displays the temperature that needs to be set.

 4. If the stirrer jumps during work, please turn off the power and turn it on again, and adjust the speed from slow to fast to restore normal production.

Fourth, the precautions for the heat-collecting magnetic heating stirrer

1. To ensure your personal safety, please use a three-phase safety socket, which must be properly grounded during use.
2. The heating time is generally not too long, intermittent use can extend the life. It can work continuously for 8 hours at medium speed and 4 hours at high speed.

3. Please do not turn on the temperature control switch when the stainless steel container is not filled with thermal oil and when the temperature sensor is not connected to avoid damage to the electric heating tube and the thermostat.

4. Please read the manual carefully before using this instrument to avoid unnecessary trouble.

5. If it is not used for a long time, please wipe it clean and place it in a dry and ventilated place.

6. The company's products are guaranteed for one year and lifelong maintenance. (Improper use or man-made damage will be charged as the cost) Please rest assured