Use and structure of low temperature thermostat

How to use low temperature thermostat:
Low temperature thermostat

Using 220V AC power supply, please make sure that the rated current of the power socket is not less than 10A and has a safety grounding device (please connect the grounding device in the work room when using it). When adding water, please note that the distance from the upper cover is no less than 8cm. Soft water must be used, preferably distilled water. Do not use hard water such as well water, river water, and spring water to prevent the heating tube from bursting and affecting the sensitivity of constant temperature. Please use it correctly according to the temperature control instrument manual, set the required temperature value> first turn on the power, set the required temperature value on the instrument according to the manual, when the temperature reaches the set temperature, you can turn on the cycle switch, so All programs enter the normal working state.

Low temperature and constant temperature bath structure
The shell is made of metal plate, and the control box is directly installed on the water tank. There are two water inlets and outlets for the condensate pipe next to it. The imported high-quality water pump is used as the circulation power in the water tank, which solves the problem of uneven warm water and makes the instrument's temperature control accuracy and water uniformity meet higher requirements. This product can circulate internally and externally. Connecting two water inlet and outlet pipes with latex tube can be used as an internal circulation. Remove the latex tube and connect the two water pipes to the water inlet and outlet of the reactor to form an external circulation. Only the copper water pipe is the outlet pipe connected to the pump, and the other is the water inlet pipe. Please be careful not to connect it wrongly, so as to avoid the water flowing back when the machine is turned on.