The advantages and functions of Runhua Gyrotron and experimental considerations

Runhua Gyrotron Description
Gyrotron
It is widely used in the laboratories of universities and colleges, environmental protection, scientific research, health, epidemic prevention, petroleum, chemical and other units. It has the characteristics of generous appearance, large capacity, low noise, light weight, small size, etc., and the speed is adjustable. There is a timing device, which is an ideal and necessary tool for laboratory staff.

Gyrotron performance:
1: Power supply: AC 220V 50Hz
2: Motor power: 120W
3: Stepless speed regulation: 0-300 times/min
4: Oscillation amplitude: gyration 20mm
5: Timing: 120 minutes maximum

How to use the Gyrotron:
1: First, put the container (bottle) to be shaken into the spring of the oscillation disc. The solution in the container should not exceed one third of the container, otherwise it must be stoppered.
2: Check the timing knob and turn it to the ON (normally open) position or the time position you need to specify.
3: Turn the speed control knob counterclockwise to the lowest speed position, turn on the power switch, the power indicator light is on, and then turn the speed control knob clockwise to the speed you need.

Note:
1: This gyro oscillator uses a three-eye safety socket, which must be properly grounded when using it.
2: When working, the machine should be placed on a flat and firm table to prevent vibration.
3: The clamp spring is only used for fixing small and medium volumetric flasks. For extra-large containers, a few springs should be removed or other methods should be adopted for reinforcement.
4: The machine should be turned off after use, placed in a dry and ventilated place, and keep it clean.