Introduction to the instruction of constant temperature shaking incubator

The constant temperature shaking incubator is a special constant temperature culture device for the cultivation and breeding of molds and microorganisms. It is especially suitable for scientific research and production in the fields of bioengineering, chemical engineering, medical research, agriculture and forestry, aquatic products, and animal husbandry.

Instructions for use of constant temperature shaking incubator:

1. Conditions of Use:

A. Ambient temperature: 10-30℃;

B. No strong light, no strong corrosive gas, good ventilation, and relative humidity below 85%;

C. Power supply: 200V±10%, 50HZ. The capacity is not less than 1KW, and the power socket with ground wire is provided;

2. Instructions:

A. Turn on the power: Insert the three-pin plug into the power socket, and set the power switch on the panel to the "on" position. At this time, the meter displays a digital display, indicating that the equipment is in working state.

B. Set the experimental temperature according to the temperature setting method (the temperature control manual is attached separately), and start working after the temperature is constant.

C. Intelligent and special requirements require additional instructions.

D. When the shaker needs to work, turn on the power switch of the shaker and adjust the speed knob to the required speed.

E. Please refer to the instrument manual for detailed settings.