The use of light incubator

The light incubator has over-temperature and sensor abnormal protection functions to ensure the safety of instruments and samples; the selection of full-spectrum plant growth lights is conducive to the growth of plants and improves disease resistance. It has the functions of power-down memory and power-off time automatic compensation; the constant temperature control system has fast response and high temperature control accuracy.

The light incubator is fully automatic controlled by microcomputer, touch switch, easy to operate; programmable multi-segment control mode, day and night can be individually set temperature, humidity, illuminance and time. Air duct type ventilation, the studio has a soft wind speed and uniform temperature; the hollow reflective tempered film glass has good thermal insulation performance and is beautiful and generous. Fully enclosed opaque lampshade, optional studio power supply, disinfection device, etc.

Need to know about the use of light incubator:

1. Turn on the power, close the power switch, the whole machine is powered on, and the power indicator light inside the switch is on.

2. For temperature control setting, please refer to the manual of the intelligent digital temperature controller.

3. If lighting is needed, turn on the lighting switch.

4. This kind of incubator has a breakpoint protection function and a one-and-a-half minute delay function, and it takes about one and a half minutes to restart the compressor after it stops.