Maintenance of digital display light incubator

Digital display light incubator, the light can be strong or weak; constant temperature and humidity incubator can also be constant humidity. The refrigeration system is a high-quality fully enclosed compressor with large refrigeration capacity and low noise. The box is equipped with a high-quality fan device to force air to flow, and the temperature distribution is more uniform.

Seven maintenance elements of the digital display light incubator:

1. The shell of the incubator should be grounded reliably.
2. The incubator should be placed in a cool, dry, well-ventilated place away from heat and sunlight. Place it stably to prevent vibration and noise. 3. To ensure effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm, there should be a 50mm gap on the side of the box, and at least 300mm on the top of the box.
4. When the incubator is transported, repaired, and maintained, avoid collision, shaking and vibration, and the maximum inclination is less than 45 degrees.
5. The instrument does not work suddenly, please check whether the fuse tube (behind the box) is burned out, and check the power supply.
6. When the incubator is working in refrigeration, it is not advisable to make the difference between the temperature in the incubator and the ambient temperature more than 25 degrees.
7. The lighting time can be programmed and controlled by the "programmable time controller". Please refer to the instruction of "Programmable Timer" for programming method