Seed germination box rh-300a seed germination intelligent control temperature control wet band lighting quality is superior

1、 Product introduction:

  The structure of the new seed germination box is made of high-quality cold plate integral sheet metal, the inner tank is made of 304 high-quality stainless steel, the high-quality 304 stainless steel tray, insulating glass, the selection of thermal insulation materials, good heat preservation, light weight, overall beautiful appearance, the control system adopts microcomputer LED control, digital display, accurate and intuitive, high precision, convenient and reliable temperature adjustment, easy to observe. Three high-quality fans are equipped in the box to force air convection and make the temperature distribution more uniform. It is equipped with spray device, totally enclosed compressor refrigeration, lighting, and plant germination box: it is suitable for the cultivation and preservation of bacteria, mold, microorganism, tissue cells, plant cultivation, breeding experiment, mold and mould engineering research, biological products, medicine, vaccine blood and all kinds of specimens preservation and experiment, is heredity, medicine, agriculture, forestry, environmental science, animal husbandry. It is an ideal experimental equipment for production and scientific research departments.

2、 Technical parameters:

1. Effective volume: 300L
2. Temperature control range: 0-60 ℃
3. Temperature control accuracy: ± 0.5-1 ℃
4. Temperature fluctuation: ± 0.1 ℃
5. Heating power: 900W
6. Power supply voltage: 220V50Hz
7. Working size: 550x500x1100cm
8. Pallet distribution: 4 in total
9. Humidity range: 40% - 95% RH
10. Cooling power: 390W
11. Each set is equipped with one ultrasonic humidifier
12. Each seed germination box is equipped with a compressor

3、 Instructions for use:

1. Turn on the power, close the power switch, the whole machine is powered on, and the power indicator in the switch is on.

2. Please refer to the manual of intelligent digital temperature controller for temperature control setting. Keep dry and ventilated. All switches on the front panel should be in non working state. The experimental samples placed in the incubator should be kept at a proper distance. It is conducive to the convection circulation of cold and hot air. Turn on the power supply, turn on the switch, and the indicator light is on; select the culture temperature.

3. If lighting is needed, turn on the lighting switch and set the temperature. Press the set key, and the data in the lower row will flash, which means entering the setting state. Press the arrow down key and the set value will decrease. After pressing the set key to the required setting temperature, it means that the working state is entered. The temperature setting is completed and the setting value is increased. Pressing the arrow up key is the same. [see the instrument operation manual for detailed operation instructions] the spraying time can be set according to the spraying time you need. Please refer to the manual of time relay for detailed operation.

4、 Maintenance of seed germination box:

1. The shell of incubator should be grounded reliably

2. The incubator should be placed in a cool, dry, well ventilated place away from heat sources and sunlight, and placed stably to prevent vibration and noise.

4. The incubator should avoid collision, shaking and vibration during handling, repair and maintenance, and the maximum gradient should be less than 45 degrees.

5. If the instrument doesn't work suddenly, please check whether the fuse (behind the box) is burnt out and check the power supply. 6. The difference between the temperature in the incubator and the ambient temperature should not be greater than 25 ℃

No video highlights...