Hh-6yj intelligent constant temperature independent stirring factory direct selling

Hh-6yj stirring water bath

1、 Purpose

  Stirring cycle constant temperature water bath pot is widely used in distillation, drying, concentration and impregnation of chemicals or biological products.

2、 Parameters

Digital display stirring constant temperature water bath
Technical indicators:
1. Temperature range: normal temperature ~ 100 ℃
2. Temperature fluctuation: ≤± 0.1 ℃
3. Temperature uniformity: ≤± 0.5 ℃
4. Temperature control range: from room temperature to 100 ℃
5. 6-hole independent digital display temperature control
6. 6-hole 6-position single stepless speed regulation mixing
7. Speed regulation range: start-up - 2400r / min
8. Working size: standard configuration: 304 stainless steel pot diameter: 200X200mm, net height: 100mm
[optional: 240x240x121mm / 300x300x160mm]
9. Heating power: 600wx6
10. Motor type: brushless DC motor.

to configure

304 (8 nickel stainless steel liners) high quality cold plate plastic spraying steel shell, high precision digital display
Closed heater is used in heating device, with small heat loss
Magnetic stirring inside, high water temperature uniformity
HH-6YJ

usage method:

  There are six stirring positions in the mixing water bath pot. The container is placed on four mixing positions respectively. There are 1-6 digit constant speed digital display instrument. In the experiment, the mixing speed can be set according to your own requirements. The heating pipe should be cleaned for a period of time to prevent scaling damage to the heating pipe.

3、 Using formal structure

  The stepless speed regulation adopts knob type mechanical speed regulation. It turns clockwise from left to right slowly and gradually until it can't rotate, which is the highest speed. The constant temperature system is: PT100 or thermistor sensing temperature, intelligent temperature controller setting temperature control, with self stabilization function, high temperature control precision, and even water circulation, the temperature is more accurate and the experiment is more efficient.

4、 Usage

  When using, water must be added into the pot first, and then the power supply is connected. To set the temperature, press the set key to enter the temperature setting mode to set or view the set value. Press the set key to see the number flashing. In the setting mode, press the up button to increase the setting value and the down button to decrease the setting value. If you keep pressing the button, it will increase or decrease to the value you need. After setting, press the set button again to exit the setting mode and return to the normal working measurement mode. Do not add too much water in the pot, so as to avoid water overflowing out of the boiler when boiling. Pay attention to that the water in the pot can not make the electric heating pipe out of the water surface, so as to avoid burning the electric heating pipe and causing water leakage.

5、 Precautions

(1) In order to ensure safety, please connect the ground wire when using.
(2) Do not add water and dry burn.
(3) When not working, the power should be cut off to prevent accidents.

Changzhou Runhua Electric Appliance Co., Ltd
Address: No.26, Jinsheng East Road, Jintan City, Jiangsu Province
website: www.runhuayiqi.com
Email: 394514722@qq.com
Tel: 0519-82305398
Fax: 0519-82306938

No video highlights...