Welcome to visit Changzhou Runhua Electric Co., Ltd. Official website!
TEL

0086-519-82305398

Current location:Home > Products > Agitator series > A magnetic stirrer
PRODUCTS
  • Multi head agitator jb-6 six magnetic stirrer with independent speed control and stepless speed regulation

Multi head agitator jb-6 six magnetic stirrer with independent speed control and stepless speed regulation

Overview:1、 Brief introduction of JB-6 magnetic stirrer Jb-6 multi head magnetic stirrer is widely used in Colleges and universities, environmental protection, scientific research, health and epidemic prevention, petrochemical, metallurgy, medical and other d…

Consulting

1、 Brief introduction of JB-6 magnetic stirrer

  Jb-6 multi head magnetic stirrer is widely used in Colleges and universities, environmental protection, scientific research, health and epidemic prevention, petrochemical, metallurgy, medical and other departments. It has good performance, no noise, no vibration, and remarkable stirring effect. It is an ideal and necessary tool for laboratory technicians


2、 Technical parameters:

1. Electric source: single phase AC, 50 Hz, 220 V ± 10 v

2. Motor power: 25W × 6

3. Stepless speed regulation: 0 ~ 2400 rpm

4. Worktable: stainless steel (surface oxidation resistance)

5. Mixing mode: six station magnetic stirring with independent speed control

7. Mixing capacity: 5000mlx6

8. Pallet material: stainless steel


 

3、 Usage:

  When using the instrument, first check whether the accessories are complete, and then install the fixture in order, put the required solution into the beaker or flask, and then put the stirrer in the center of the chromium plating plate. Plug in the power supply, turn on the power switch, and the indicator light is on to indicate that the power source is connected, Turn on the working switch and the indicator light is on. Adjust the speed control knob from left to right (from low speed to high speed) to select the mixing speed you need. It is not allowed to start at high speed directly, so as to prevent the agitator from being out of sync and causing jumping. Cut off the power supply after use. In order to ensure safety, please ground the instrument. Keep the instrument clean and dry. Do not allow solution into the machine to avoid damage to the machine parts


4、 Precautions:

a) Mixing time should not be too long, intermittent use can prolong life
b) It can work continuously at medium speed and 8 hours at high speed
c) Please read the manual carefully for correct use
d) If it is not used for a long time, please wipe it and put it in a dry and ventilated place


}
Video

    No video highlights...
Photo
No photo collection...
Customer
Flash Demo

Project
No related case...
Related articles
Related products
Consulting

Copyright 2020 Changzhou Runhua Electric Co., Ltd. Copyright Design by:EastNet [Manage]
Top