85-2 constant temperature magnetic stirrer digital display reading intuitive high quality products

Performance of 85-2 digital display constant temperature magnetic stirrer:

1. Single phase AC, 50 Hz, 220 V
2. Motor power: 40W, hot wire power: 300W
3. Stepless speed regulation: 0-2400 rpm
4. Digital display constant temperature, normal temperature - 100 ℃

2-85 digital display mixer is used

  When using 85-2 digital display constant temperature magnetic stirrer, first check whether the accessories are complete, then install the fixture in order, and put the solution to be stirred in the center of the chromium plating plate. Add the solution, put the stirrer in the beaker solution, and then plug in the power plug of the instrument, turn on the power switch, the indicator light will be on, and then select the temperature you need. The speed regulation is gradually adjusted from low speed to high speed, and the high speed gear is not allowed to start directly, so as to prevent the agitator from being out of sync and causing jumping, and heating can not be conducted without stirring With band switch control, power should be cut off when not working. The instrument should be kept clean and dry, and no solution is allowed to enter the machine.

Precautions for 85-2 digital display constant temperature magnetic stirrer

(1) When mixing, if the stirrer jumps or does not stir, check whether the beaker is stable and the position is correct.

(2) Medium speed operation can prolong service life

(3) Please connect the ground wire when using

List of 85-2 digital display constant temperature magnetic stirrer

1. 1 complete machine

2. 1 stirrer

3. 1 power cord

4. 1 chrome plated vertical pole

5. 1 chrome plated cross joint

6. 1 rubber chuck

7. Two bakelite supporting screws

8. One sensor

No video highlights...