0086-519-82305398
Overview：Set temperature: Press set key to set or view the temperature set point. Press the set key once, and the nixie tube character starts to flash, indicating that the instrument enters the setting state. Press the △ key to increase the setting value, and…
ConsultingSet temperature:
Press set key to set or view the temperature set point. Press the set key once, and the nixie tube character starts to flash, indicating that the instrument enters the setting state. Press the △ key to increase the setting value, and press the ▽ key to decrease the setting value. If you press the △ key or ▽ key for a long time, the data will change rapidly. If you press the set key again, the instrument will return to the normal working state. After the temperature is set, the heating and circulating pump switches can be started. (if the temperature controller is intelligent, the temperature control manual shall be attached).
Scope of application:
Low temperature constant temperature bath is suitable for direct heating and cooling of precise constant temperature in biology, chemistry, physics, plant, chemical engineering, etc.
usage method:
Before use, please read the manual carefully and be familiar with the instrument and control panel. Use a megohmmeter to measure the power supply, plug and ground for poor insulation or short circuit. Set the experimental temperature according to the temperature setting method. After the temperature is constant, the experiment can be started. If tap water is used, clean the thermostatic pot once after each use to prevent the temperature sensitivity from being affected by scale accumulation on the heater
Structure of low temperature constant temperature bath:
Runhua series low-temperature thermostatic pot structure is metal rectangular, using cold-rolled steel plate shell, stainless steel tank, digital temperature controller, power supply, water pump are installed in the control box.
Technical parameters of serial digital display temperature control circulation cryogenic tank:
|
model |
name |
Main technical parameters |
|
HH-601B-5-5 |
Low temperature constant temperature bath |
temperature range-5～100℃,≤±0.5℃,180*140*200mm,Pump flow 8L / min |
|
HH-601B-5-10 |
Low temperature constant temperature bath |
temperature range-5～100℃,≤±0.5℃,250*200*200mm,Pump flow 8L / min |
|
HH-601B-5-15 |
Low temperature constant temperature bath |
temperature range-5～100℃,≤±0.5℃,300*250*200mm,Pump flow 8L / min |
|
HH-601B-5-20 |
Low temperature constant temperature bath |
temperature range-5～100℃,≤±0.5℃,300*250*260mm,Pump flow 8L / min |
|
HH-601B-10-5 |
Low temperature constant temperature bath |
temperature range-5～100℃,≤±0.5℃,180*140*200mm,Pump flow 8L / min |
|
HH-601B-10-10 |
Low temperature constant temperature bath |
temperature range-10～100℃,≤±0.5℃,250*200*200mm,Pump flow 8L / min |
|
HH-601B-20-15 |
Low temperature constant temperature bath |
temperature range-20～100℃,≤±0.5℃,300*250*200mm,Pump flow 8L / min |
|
HH-601B-20-20 |
Low temperature constant temperature bath |
temperature range-20～100℃,≤±0.5℃,300*250*260mm,Pump flow 8L / min |
|
HH-601B-20-5 |
Low temperature constant temperature bath |
temperature range-20～100℃,≤±0.5℃,180*140*200mm,Pump flow 8L / min |
|
HH-601B-20-10 |
Low temperature constant temperature bath |
temperature range-20～100℃,≤±0.5℃,250*200*200mm,Pump flow 8L / min |
|
HH-601B-20-15 |
Low temperature constant temperature bath |
temperature range-20～100℃,≤±0.5℃,300*250*200mm,Pump flow 8L / min |
|
HH-601B-20-20 |
Low temperature constant temperature bath |
temperature range-20～100℃,≤±0.5℃,300*250*260mm,Pump flow 8L / min |
|
HH-601B-30-5 |
Low temperature constant temperature bath |
temperature range-30～100℃,≤±0.5℃,180*140*200mm,Pump flow 8L / min |
|
HH-601B-30-10 |
Low temperature constant temperature bath |
temperature range-30～100℃,≤±0.5℃,250*200*200mm,Pump flow 8L / min |
|
HH-601B-30-15 |
Low temperature constant temperature bath |
temperature range-30～100℃,≤±0.5℃,300*250*200mm,Pump flow 8L / min |
|
HH-601B-30-20 |
Low temperature constant temperature bath |
temperature range-30～100℃,≤±0.5℃,300*250*260mm,Pump flow 8L / min |
Product features:
1. The air-cooled fully enclosed compressor unit has high cooling speed.
2. The refrigeration system has multiple protection devices such as overheating and over-current. The circulating pump can lead the constant temperature liquid out of the tank to establish a second constant temperature field. It can also be used as a cold source to lead the refrigerated liquid in the tank to the experimental vessel outside the machine.
3. The structure of the instrument is compact, the shell is made of high-quality steel plate, and the inner tank is made of stainless steel.
4. The microcomputer intelligent control system is adopted. Touch the soft key to quickly set the temperature, easy to operate.
5. The deviation of temperature measurement is corrected by microcomputer, and the accuracy of digital display is 0.1 ℃.
Hotline: 0519-82305398
Welcome to the official website of Runhua Instruments. We are a professional manufacturer of laboratory instruments. Quality and reputation a…
The water bath constant temperature shaker is a biochemical instrument that combines a temperature controllable constant temperature water ba…
Series of biochemical incubators:Features of 150A biochemical incubator: the biochemical incubator has the function of cooling and heating tw…
High-precision stirring water bath produced by Runhua Instruments:1) The general water bath does not have the circulating stirring function. …
Maintenance and maintenance of electric mixer1. Correct use and attention to the maintenance of the instrument to keep it in good working con…
What work should be done in the use of digital display stainless steel electric heating plate? Digital display stainless steel electric h…
