Bs-ae double layer full temperature oscillation incubator

Introduction of bs-ae double layer full temperature oscillation incubator

  Full temperature oscillation incubator (also known as constant temperature shaker) is widely used in bacterial culture, fermentation, hybridization, biochemical reaction, enzyme and cell tissue research, etc. it can be used for the dynamic and static culture of microbial cells and various strains. Set constant temperature culture and oscillation in one, one machine dual-purpose. Compressor and circulating fan are imported products, environmental protection, fluorine-free refrigeration, DC brushless motor, long life, wide speed regulation, constant torque, constant speed, maintenance free. Concept aesthetic design with observation window. The inner tank and vibration table are made of anti bacteria stainless steel and four corner arc, which are easy to clean. The unique speed control circuit can ensure the shaking table to start slowly and accelerate smoothly, prevent liquid splashing and ensure the safety of the experimental samples.

1、 Application range of full temperature oscillation incubator:

  Runhua full temperature oscillation incubator, also known as full temperature oscillation shaker, is a biochemical instrument with heating and cooling two-way temperature regulation system, temperature controllable incubator and oscillator. It is an indispensable laboratory equipment for precise cultivation and preparation of plants, biology, microbiology, genetics, viral medicine, environmental protection, food, petroleum, chemical and other scientific research, education and production departments.

2、 The main characteristics of the full temperature oscillation incubator are as follows

1. The thermal insulation material of the liner is made of polyurethane foam, which has strong anti-interference ability to the external thermal (cold) source.

2. There is a circulating air duct in the working room to ensure the temperature distribution in the box is even, and there is an oxygen supply hole to keep the air in the box fresh.

3. The inner liner is made of stainless steel, with good corrosion resistance and glass window for indoor observation.

4. The system can be heated to 50 ℃ when the ambient temperature is - 5 ℃.

5. The system can cool down to 5 ℃ when the ambient temperature is 32 ℃.

6. The universal spring clamp is especially suitable for the cultivation of biological samples for a variety of comparative tests.

7. Stepless speed regulation, simple operation, stable operation, no speed deviation.

8. The temperature control system is controlled by microcomputer, with dual screen display of actual temperature and set temperature, which is clear and intuitive. The speed display adopts LED display

At the same time, the long time timing function is added, and the oscillation timing range can be adjusted from 0.1 hours to 99.9 hours.

3、 Detailed technical parameters of full temperature oscillation incubator: [similar series varieties]

4、 Instructions for full temperature oscillation incubator:

1. The instrument should be placed on the flat ground, the environment should be clean and tidy, dry and ventilated.

2. Before using the instrument, all control switches should be in non working state, and the speed control knob should be at the minimum position.

3. In order to ensure good balance performance of the instrument during oscillation and avoid large vibration, all bottle positions should be filled during bottling, and the culture medium of each bottle should be roughly equal. If the culture medium is insufficient, the test bottle can be placed symmetrically.

4. Turn on the external power supply, turn the power switch to the "on" position, and the indicator light will be on.

5. Select the culture temperature: please refer to the instruction manual.

6. Turn on the "oscillation switch", the indicator light is on, slowly adjust the speed control knob to increase the required speed.

The service life of the instrument can be prolonged if it is used at medium speed within the speed range.

7. Before each shutdown, all control switches should be in non working state and cut off the power supply.

8. Precautions:

a: The oscillators of two groups of oscillators are respectively controlled by their own "oscillation switch" and "speed regulation knob".

b: The full temperature oscillation incubator is not suitable for the cultivation of articles containing volatile chemical solvents, low concentration explosive gases, low ignition gases and toxic substances.

5、 Maintenance of full temperature oscillation incubator:

1. Correct use and attention to the maintenance of the instrument, make it in a good working state, can extend the service life of the instrument.

2. After the refrigeration system stops working, clean the working chamber and glass observation window with a soft cloth.

During the continuous operation of the instrument, regular inspection should be carried out every three months; check whether there are water drops and dirt falling on the motor and exposed refrigeration components; clean the dust and dirt on the compressor and condenser; check the fuse, control element and fastening screw.

3. The bearing of the oscillation transmission part of the full temperature oscillation incubator has been filled with an appropriate amount of grease (No. 1 calcium sodium base) before leaving the factory. During the continuous operation of the instrument, the lubricating grease should be filled every six months, and the filling amount accounts for about 1 / 3 of the bearing space.

4. The natural wear of the full temperature oscillation incubator is normal after long-term use. After the full temperature oscillation incubator has been used for one year without warranty, our company will continue to provide high quality service.


If the above full temperature oscillation incubator model can not meet your requirements, we can produce customized according to the requirements.

No video highlights...