Light incubator 250da intelligent large screen LCD manufacturers direct sales, welcome to call

1、 Product introduction:

  The structure of the new light box is made of high-quality cold plate, the inner liner is made of high-quality stainless steel mirror panel and hollow glass, the interlayer is made of high-quality high-density foam material, which has good thermal insulation effect, light weight and beautiful overall appearance. The control system adopts microcomputer P.I.D LCD control, large screen LCD, digital display, accurate and intuitive, high precision, convenient and reliable temperature adjustment, easy to observe. The refrigeration system is a high quality hermetic compressor. The cooling speed is fast and the noise is low. Two high-quality fans are equipped in the box to force the air to convection and the temperature distribution is more uniform. The purpose of the seed incubator is: it is suitable for the cultivation and preservation of bacteria, mold, microorganism, tissue cells, plant cultivation, breeding test, mycology, mold engineering research; the preservation and test of biological products, drugs, vaccine blood and various specimens; it is the production of genetics, medicine, agriculture, forestry, environmental science, animal husbandry, aquatic products, etc And scientific research department of the ideal experimental equipment.

2、 Technical parameters:

1. Effective volume: 250L

2. Temperature control range: 0-60 ℃

3. Temperature control accuracy: ± 0.5

4. Temperature fluctuation: ± 0.1

5. Heating power: 600W    

6. Power supply voltage: 220V50Hz

7. Working size: 480x510x1100mm  

8. Equipped with 3 pallets (304 stainless steel)

9. Refrigeration power: 330W

10. Intelligent lighting 6-stage controllable

11. Light intensity can be set according to their own needs of time and light intensity, please check the detailed operation of the instrument

3、 Instructions for use:

1. Turn on the power, close the power switch, the whole machine is powered on, and the power indicator in the switch is on.

2. Please refer to the manual of intelligent digital temperature controller for temperature control setting. Keep dry and ventilated. All switches on the front panel should be in non working state. The experimental samples placed in the incubator should be kept at a proper distance. It is conducive to the convective circulation of cold and hot air. Turn on the power supply, turn on the switch, and the indicator light will be on; if the cultivation temperature is selected and humidity is required, turn on the humidity switch.

3. If lighting is needed, turn on the lighting switch and set the temperature. Press the set key, and the data in the lower row will flash, which means entering the setting state. Press the arrow down key and the set value will decrease. After pressing the set key to the required setting temperature, it means that the working state is entered. The temperature setting is completed and the setting value is increased. Pressing the arrow up key is the same. [see the instrument operation manual for detailed operation instructions]

4. The incubator has the function of power-off protection and a minute and a half delay function. It takes about two minutes for the compressor to start again after shutdown.

4、 Maintenance of incubator:

1. The shell of incubator should be grounded reliably

2. The incubator should be placed in a cool, dry, well ventilated place away from heat sources and sunlight, and placed stably to prevent vibration and noise.

3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 10 cm, the side of the box should have a space of 5 cm, and the top of the box should have a space of 30 cm.

4. The incubator should avoid collision, shaking and vibration during handling, repair and maintenance, and the maximum gradient should be less than 45 degrees.

5. If the instrument doesn't work suddenly, please check whether the fuse (behind the box) is burnt out and check the power supply.

  Runhua instruments: the main products are: various digital display constant temperature biochemical, light incubator, refrigeration constant temperature oscillation incubator, digital display electrothermal constant temperature incubator, vacuum, blast drying oven, carbon dioxide incubator, constant temperature and humidity incubator, salt spray test chamber, water-proof incubator, multi-functional refrigeration water bath, air bath oscillation shaker, various magnetic, electric, speed measuring multi-functional stirring Mixer, constant speed powerful electric agitator, high temperature digital display heat collecting stirrer, large capacity and high power magnetic stirrer, various water bath pans, super digital constant temperature circulating water tank, internal and external circulating oil bath pan, various high and low speed centrifuges, various water bath, gas bath digital display thermostatic oscillator, various reciprocating, gyratory shaking table, extraction vertical purification oscillator, double-layer large-scale multi-functional oscillation There are more than 100 kinds of laboratory instrument products, such as large-scale frozen air shaker, all kinds of plant tissue mashing and homogenizing machine, high-speed disperser, various digital display electric heating plate, constant temperature loading table, micro oscillator, vortex mixer, penicillin rapid mixer, decoloration shaker, low-temperature vertical water tank, analysis and detection, etc.

No video highlights...