Quality assurance recommended by manufacturers for intelligent constant temperature and humidity incubator

1、 Scope of application

  It is the necessary equipment for the biological cultivation of stored strains in medical and health, medicine, biology, agriculture, scientific research, crops and other departments.

2、 Technical index

2、 Structure overview

  The incubator is vertical. The cabinet and outer door are made of high-quality steel plate. The surface of the incubator is electrostatic sprayed. With a large observation window, the culture items in the incubator can be observed clearly without opening the inner door. The workroom adopts steel plate or stainless steel plate. The shelf can be moved easily and the height of the shelf can be changed arbitrarily. Six fans are installed in the working room to ensure the temperature uniformity in the chamber. The box shell and the working room are filled with ultra-fine glass wool for heat insulation. Set the function according to the operation instructions of the instrument!!!

3、 Operation precautions:

  The power switch, power indicator and temperature control instrument are all set on the upper part of the incubator. The temperature control instrument has high temperature control precision, the set temperature and time are digital display, and the set temperature has protection device and tracking alarm function.

usage method:

1. Turn the power switch to "I", then the power indicator is on, and the temperature controller has digital display.

2. Temperature setting: click the setting key: the ambient temperature appears on the display screen, and then press the increase or decrease key until the required value.

3. Because the user of this instrument does not require refrigeration, so the heating must be set from low temperature to high temperature step by step. If it changes from high temperature to low temperature and needs natural air cooling, the time will be a little longer, so the ideal effect can be achieved by paying attention to the use.

4. After humidity setting, when it is close to the set temperature: [i.e. constant temperature], the humidifier starts to humidify and stops when it reaches the set humidity.

5. The built-in brackets are designed as leaf hanging type and leaf laying type, with a total of 4 pieces. If you need to add, please contact us, the bracket can be placed up and down at will.

4、 Precautions

1. The outer shell of the incubator must be effectively grounded to ensure safe use.

2. The incubator should not be placed in the room with good ventilation conditions, and inflammable and explosive materials should not be placed around the incubator.

3. The articles in the box should not be too crowded, and space must be reserved. In order to prevent the uneven temperature control caused by the failure of wind speed circulation, there is a water outlet under the bottom rear wall, and there are four 115mm diameter circular dehumidification holes on the two sides for moisture removal.

4. The inside and outside of the box should be kept clean. If it is not used for a long time, it should be covered with plastic dust cover and placed in the drying room.

5. It is normal to have overshoot at the beginning of each use. The culture should be placed after the temperature is stable.

5、 Troubleshooting

6、 Packing list

Changzhou Runhua Electric Appliance Co., Ltd
Address: No.26, Jinsheng East Road, Jintan City, Jiangsu Province
Tel: 0519-82305398
Fax: 0519-82306938
website: www.runhuayiqi.com

No video highlights...