Constant temperature and humidity incubator intelligent program-controlled LCD lhp-150 delivery timely welcome to purchase

1、 Product introduction:

  The structure of the new constant temperature and humidity incubator is made of high-quality cold plate die. The inner tank is made of high-quality anti-corrosion materials and panoramic insulating glass, which is easy to observe. The insulation material is polyurethane foam, with good heat preservation, light weight and beautiful overall appearance. The control system adopts microcomputer LCD control and digital display, which is accurate and intuitive, high precision, convenient and reliable temperature regulation Easy to observe. The refrigeration system is a high quality hermetic compressor. The cooling speed is fast, the noise is low, the box is equipped with high-quality fan device, forced air convection, temperature distribution is more uniform. It is suitable for the cultivation and preservation of bacteria, mold, microorganism, tissue cells, plant cultivation, breeding test, mycology, mold engineering research; the preservation and test of biological products, drugs, vaccine blood and various specimens; it is the production of genetics, medicine, agriculture, forestry, environmental science, animal husbandry, aquatic products, etc And scientific research department of the ideal experimental equipment.

2、 Technical parameters:

1. Effective volume: 150L
2. Temperature control range: 5-60 ℃
3. Temperature uniformity: ± 1 ℃
4. Temperature fluctuation: ± 0.1 ℃
5. Heating power: 600W
6. Power supply voltage: 220V50Hz
7. Working size: 470x405x960mm
8. Each instrument is equipped with 3 pallets
9. Refrigeration power: 280W refrigerant: environmentally friendly fluorine-free R134a refrigerant
10. Humidity range: 40-95% [the humidity content can be determined according to the duration of humidification] humidity accuracy: ± 3-8 ℃ (at constant temperature)

3、 Instructions for use:

1. Turn on the power, close the power switch, the whole machine is powered on, and the power indicator in the switch is on. The right side is equipped with a fan switch, which can be opened or closed according to your own needs.

2. Please refer to the manual of intelligent digital temperature controller for temperature control setting. Keep dry and ventilated. All switches on the front panel should be in non working state. The experimental samples placed in the incubator should be kept at a proper distance. It is conducive to the convective circulation of cold and hot air. Turn on the power supply, turn on the switch, and the indicator light will be on; if the cultivation temperature is selected and humidity is required, turn on the humidity switch.

3. If lighting is needed, turn on the lighting switch and set the temperature. Press the set key, and the data in the lower row will flash, which means entering the setting state. Press the arrow down key and the set value will decrease. After pressing the set key to the required setting temperature, it means that the working state is entered. The temperature setting is completed and the setting value is increased. Pressing the arrow up key is the same. [see the instrument operation manual for detailed operation instructions]

4. The constant temperature and humidity incubator has power-off protection function and a minute and a half delay function. The compressor can be started again for about one minute after shutdown.

4、 Maintenance of constant temperature and humidity incubator:

1. The shell of constant temperature and humidity incubator should be grounded reliably

2. The constant temperature and humidity incubator should be placed in a cool, dry, well ventilated place away from heat source and sunlight, and placed stably to prevent vibration and noise.

3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 10 cm, the side of the box should have a space of 5 cm, and the top of the box should have a space of 30 cm.

4. The constant temperature and humidity incubator should avoid collision, shaking and vibration during handling, maintenance, and the maximum inclination should be less than 45 degrees.

5. If the instrument doesn't work suddenly, please check whether the fuse (behind the box) is burnt out and check the power supply

Changzhou Runhua Electric Appliance Co., Ltd
Tel: 0519-82305398 82301086
Fax: 0519-82306938
Address: No.26, Jinsheng East Road, Jintan City, Jiangsu Province
website: www.runhuayiqi.com

No video highlights...