Bpc250f intelligent liquid crystal display with high precision and good experimental effect

1、 Product introduction:

  The biochemical incubator structure is made of high-quality cold plate, the inner tank is made of high-quality mirror 304 stainless steel anti-corrosion material, panoramic glass door, which is convenient for observation. The insulation material is polyurethane foam, with good heat preservation, light weight and beautiful overall appearance. The control system adopts microcomputer liquid crystal LCD digital display, which is accurate and intuitive, high precision, convenient and reliable temperature adjustment, and convenient for observation. The refrigeration system is made of high quality hermetic compressor with three copper tubes. This machine has the advantages of fast cooling speed and low noise. Two high-quality fans are installed in the box to force air convection and make the temperature distribution more uniform. Application of biochemical incubator: it is suitable for the cultivation and preservation of bacteria, mold, microorganism, tissue cells, plant cultivation, breeding test, mycology, mold engineering research; preservation and test of biological products, drugs, vaccines, blood and various specimens. It is an ideal experimental equipment for production and scientific research departments of genetics, medicine, agriculture, forestry, environmental science, animal husbandry, aquatic products, etc.

2、 Technical parameters:

1. Effective volume: 250L
2. Temperature control range: 0-60 ℃
3. Temperature control accuracy: ± 0.1
4. Temperature fluctuation: ± 0.1
5. Heating power: 600W
6. Power supply voltage: 220V50Hz
7. Working size: 520x440x1130mm
8. If each instrument is equipped with 3 pallets, additional cost will be charged for additional trays [standard configuration of 3 pallets]
9. Refrigerant: R134a environment-friendly fluorine-free refrigerant
10. Dimension: 600x530x1640mm

3、 Instructions for use:

1. Turn on the power, close the power switch, the whole machine is powered on, and the power indicator in the switch is on

2. Please refer to the manual of intelligent digital temperature controller for temperature control setting. Keep dry and ventilated. All switches on the front panel should be in non working state. The experimental samples placed in the incubator should be kept at a proper distance. It is conducive to the convection circulation of cold and hot air. Turn on the power supply, turn on the switch, and the indicator light is on; select the culture temperature.

3. If lighting is needed, turn on the lighting switch and set the temperature. Press the set key, and the data in the lower row will flash, indicating that it is in the setting state. Press the up and down arrow keys and set. After pressing the required temperature, press the set key again to enter the working state and the temperature setting is completed

4. The incubator has the function of power-off protection and a minute and a half delay function. It takes about one minute to restart the compressor after shutdown

4、 Maintenance of biochemical incubator:

1. The shell of incubator should be grounded reliably

2. The incubator should be placed in a cool, dry, well ventilated place away from heat sources and sunlight, and placed stably to prevent vibration and noise.

3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 10 cm, the side of the box should have a space of 5 cm, and the top of the box should have a space of 30 cm.

4. The incubator should avoid collision, shaking and vibration during handling, repair and maintenance, and the maximum gradient should be less than 45 degrees.

5. If the instrument doesn't work suddenly, please check whether the fuse (behind the box) is burnt out and check the power supply.

Purchasing hotline: 0519-82305398 0519-82306938 0519-82301086

No video highlights...