Welcome to visit Changzhou Runhua Electric Co., Ltd. Official website!
TEL

0086-519-82305398

Current location:Home > Products > Incubator series > Biochemical incubator
PRODUCTS
  • 250B biochemical incubator

250B biochemical incubator

Overview:1、 Product introduction: The structure of biochemical incubator is made of high-quality cold plate and integral sheet metal. The inner tank is made of high-quality anti-corrosion materials, insulating glass, polyurethane foam, good heat preservation,…

Consulting

1、 Product introduction:

  The structure of biochemical incubator is made of high-quality cold plate and integral sheet metal. The inner tank is made of high-quality anti-corrosion materials, insulating glass, polyurethane foam, good heat preservation, light weight and beautiful overall appearance. The control system adopts microcomputer control and digital display, which is accurate and intuitive, high-precision, convenient and reliable temperature regulation, and easy to observe. The refrigeration system is a high quality hermetic compressor. The cooling speed is fast and the noise is low. Two high-quality fans are equipped in the box to force the air to convection and the temperature distribution is more uniform. Application of biochemical incubator: it is suitable for the cultivation and preservation of bacteria, mold, microorganism, tissue cells, plant cultivation, breeding test, mycology, mold engineering research; preservation and test of biological products, drugs, vaccines, blood and various specimens. It is an ideal experimental equipment for production and scientific research departments of genetics, medicine, agriculture, forestry, environmental science, animal husbandry, aquatic products, etc.


2、 Technical parameters:

1. Effective volume: 250L
2. Temperature control range: 5-60 ℃
3. Temperature control accuracy: ± 0.5
4. Temperature fluctuation: ± 0.5
5. Heating power: 300W
6. Power supply voltage: 220V50Hz
7. Working size: 540x460x1000mm
8. Each instrument is equipped with 4 pallets
9. Cooling power R134a (when the incubator is cooling, the temperature of incubator is 16-32 ℃)


3、 Instructions for use:

1. Turn on the power, close the power switch, the whole machine is powered on, and the power indicator in the switch is on

2. Please refer to the manual of intelligent digital temperature controller for temperature control setting. Keep dry and ventilated. All switches on the front panel should be in non working state. The experimental samples placed in the incubator should be kept at a proper distance. It is conducive to the convection circulation of cold and hot air. Turn on the power supply, turn on the switch, and the indicator light is on; select the culture temperature.

3. If lighting is needed, turn on the lighting switch and set the temperature. Press the set key, and the data in the lower row will flash, which means entering the setting state. Press the arrow down key and the set value will decrease. After pressing the set key to the required setting temperature, it means that the working state is entered. The temperature setting is completed and the setting value is increased. Pressing the arrow up key is the same.

4. The incubator has the function of power-off protection and a minute and a half delay function. It takes about one minute to restart the compressor after shutdown


4、 Maintenance of biochemical incubator:

1. The shell of incubator should be grounded reliably

2. The incubator should be placed in a cool, dry, well ventilated place away from heat sources and sunlight, and placed stably to prevent vibration and noise.

3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 10 cm, the side of the box should have a space of 5 cm, and the top of the box should have a space of 30 cm.

4. The incubator should avoid collision, shaking and vibration during handling, repair and maintenance, and the maximum gradient should be less than 45 degrees.

5. If the instrument doesn't work suddenly, please check whether the fuse (behind the box) is burnt out and check the power supply.
}
Video

    No video highlights...
Photo
No photo collection...
Customer
Flash Demo

Project
No related case...
Related articles
Related products
Consulting

Copyright 2020 Changzhou Runhua Electric Co., Ltd. Copyright Design by:EastNet [Manage]
Top