150-1a biochemical incubator (intelligent temperature control)

1、 Brief introduction of biochemical incubator:
  Biochemical incubator has the function of cooling and heating two-way temperature regulation system, and the temperature can be controlled. It is an indispensable laboratory equipment for scientific research of plants, biology, microorganism, genetics, virus, medicine, environmental protection, etc. it is widely used in low temperature and constant temperature test, culture test, environmental test, etc.

2、 The main characteristics of biochemical incubator are as follows
1. The insulation material of the box is made of polyurethane foam, which has strong anti-interference ability to the external thermal (cold) source.

2. The inner cavity is made of engineering plastics, which has strong corrosion resistance.

3. The glass door is convenient to observe the working cavity.

4. In order to protect the refrigeration compressor, the control circuit is designed with power-off protection and 4-minute delay function.

5. Temperature automatic control, using red LFD display, digital display intuitive and clear.

3、 Biochemical incubator technical indicators:
Indicators 150-1a
150L effective volume
Temperature control range: 5-50 ℃
Temperature accuracy + 0.5 ℃
Compressor power 128W
Heating power 100W
Power supply AC 220 V 50 Hz

Instructions for use of biochemical incubator:

1. Turn on the power, close the power switch, the whole machine is powered on, and the power indicator in the switch is on.

2. Please refer to the manual of intelligent digital temperature controller for temperature control setting.

3. For lighting, turn on the lighting switch.

4. The incubator has a breakpoint protection function and a minute and a half delay function. The compressor will start again after shutdown for about one and a half minutes.

Maintenance and cultivation of biochemical incubator:

1. The outer shell of the incubator should be grounded reliably.

2. The incubator should be placed in a cool, dry, well ventilated place away from heat and sunlight. It should be placed stably to prevent vibration and noise.

3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100 mm. There should be a 50 mm gap on the side of the box and at least 30 cm space on the top of the box.

4. When handling, repairing and maintaining the incubator, collision, shaking and vibration should be avoided; the maximum inclination should be less than 45 degrees.

5. The instrument doesn't work suddenly. Please check whether the fuse tube (behind the box) is burnt out and check the power supply.

When purchasing, please note: you need to buy: box assembly and overall sheet metal production. The price is different.