HY-2 large capacity reciprocating speed regulating multi-purpose oscillator manufacturer wholesale stepless speed regulation machinery timing welcome to call

Brief introduction of HY-2 adjustable speed multi-purpose oscillator

  The adjustable speed multi-purpose oscillator is widely used in the laboratories of colleges and universities, environmental protection, scientific research, health, epidemic prevention, petroleum, chemical industry and other units. It has the characteristics of generous appearance, large capacity, low noise, light weight, small size, adjustable speed and timing device. It is an ideal and necessary tool for laboratory staff.

Performance of multi-purpose adjustable speed oscillator:

1: Power supply: AC 220 V, 50 Hz
2: Motor power: 160W
3: Stepless speed regulation: 0-300 times / min
4: Oscillation amplitude: Reciprocating 20 mm
5: Timing: maximum 120 minutes
6: With (a) speed digital display: 0-300 rpm

How to use the multi-purpose adjustable speed oscillator:

1:首先将需振荡的容器(瓶)放入振荡盘弹簧中，容器中的溶液不能超过容器的三分之一，否则必须加塞。
2:察看定时旋钮，旋在ON(常开)位置或您所需指定的时间位置。
3:将调速旋钮逆时钟旋至最低速位置，打开电源开关，电源指示灯亮，再将调速旋钮顺时钟旋至您所需的速度。

多用调速振荡器注意事项：

1: The multi-purpose adjustable speed oscillator adopts three hole safety socket, and the ground wire must be properly connected when using.
2: When working, the machine should be placed on a flat and solid table to prevent vibration.
3: The clamp spring is only used for fixing small and medium capacity bottles. Several springs should be removed or other methods should be adopted to reinforce the extra large container.
4: After the machine is used, turn off the power supply, put it in a dry and ventilated place, and keep it clean.

2、 Technical indexes of related similar series of varieties:

HY-2 oscillator without speed measurement:

  Speed regulating oscillator is a kind of biochemical instrument that can mix up and down, left and right, gyratory oscillation and even mixing a variety of samples in the same environmental conditions. The series of products run smoothly, with low noise and infinitely adjustable oscillation speed. It adopts stainless steel spring universal fixture (or customized special fixture), which can be equipped with a variety of test bottles to meet the needs of different customers. It is the preferred equipment in the research and production of Biochemistry, bioengineering, teaching, microbiology and medicine

Detailed information of HY-2 adjustable speed multi-purpose oscillator:

Detailed description of HY-2 adjustable speed multi-purpose oscillator

  The adjustable speed multi-purpose oscillator is widely used in the laboratories of colleges and universities, environmental protection, scientific research, health, epidemic prevention, petroleum, chemical industry and other units. It has the characteristics of generous appearance, large capacity, low noise, light weight, small size, adjustable speed and timing device. It is an ideal and necessary tool for laboratory staff.

Performance of speed regulating multi-purpose oscillator:

1: Power supply: AC 220 V 50 Hz motor power: 160 w stepless speed regulation: 0-300 times / min
2: Oscillation amplitude: Reciprocating 20 mm
3: Timing: maximum 120 minutes

How to use the speed regulating multi-purpose oscillator:

1: First, put the container (bottle) to be vibrated into the universal oscillation fixture. The solution in the container should not exceed one third of the container, otherwise it must be plugged.
2: Check the timing knob and turn it to the on position or the time position you need to specify.
3: Turn the speed control knob to the minimum speed position against the clock, turn on the power switch, the power indicator light will be on, and then turn the speed control knob clockwise to the speed you need.

Notes for speed regulating multi-purpose oscillator:

1: The speed regulating multi-purpose oscillator adopts three hole safety socket, and the ground wire must be properly connected when using.
2: When working, the machine should be placed on a flat and solid table to prevent vibration.
3: The clamp spring is only used for fixing small and medium capacity bottles. Several springs should be removed or other methods should be adopted to reinforce the extra large container.

4: After the machine is used, turn off the power supply, put it in a dry and ventilated place, and keep it clean.

No video highlights...