HY-5 (a) adjustable speed multi-purpose oscillator

Brief introduction of hy-5a gyrotron oscillator

1、 Cyclotron oscillator performance:

1: Power supply: AC 220 V, 50 Hz
2: Motor power: 120W
3: Stepless speed regulation: 0-300 times / min
4: Oscillation amplitude: gyration 20 mm
5: Timing: maximum 120 minutes
6: Working size: 450 * 360mm

2、 Usage of gyrotron oscillator:

1: First, put the container (bottle) to be vibrated into the oscillation disk spring. The solution in the container should not exceed one third of the container, otherwise it must be plugged.

2: Check the timing knob and turn it to the on position or the time position you need to specify.

3: Turn the speed control knob to the minimum speed position against the clock, turn on the power switch, the power indicator light will be on, and then turn the speed control knob clockwise to the speed you need.

3、 Note for gyrotron oscillator:

1: The gyrotron oscillator adopts three hole safety socket, and the ground wire must be properly connected when using.

2: When working, the machine should be placed on a flat and solid table to prevent vibration.

3: The clamp spring is only used for fixing small and medium capacity bottles. Several springs should be removed or other methods should be adopted to reinforce the extra large container.

4: After the machine is used, turn off the power supply, put it in a dry and ventilated place, and keep it clean.

  Runhua hy-5a oscillator adopts new material, new technology and new technology, which makes the product refreshing and easy to use. The instrument is applicable to the scientific research units of sanitation and epidemic prevention and environmental monitoring

  It can also be used in the fields of chemical analysis and various samples mixing evenly in colleges, industrial and mining enterprises, etc

Detailed introduction

1、 Cyclotron oscillator principle:

  This instrument uses the characteristics of permanent magnet brushless DC motor: by adjusting the voltage, the oscillation frequency of the instrument can be effectively changed to achieve the ideal oscillation speed.

2、 Cyclotron oscillator applications:

  According to the different needs of users, the hy-5a oscillator produced by our factory adopts new materials, new technology and new technology as far as possible, which makes the products refreshing and easy to use. This instrument is applicable to the situation of chemical analysis and mixing of various samples in scientific research institutions, colleges and universities, industrial and mining enterprises, etc. it is also suitable for biochemical cultivation of various fungi.

3、 Usage of gyrotron oscillator:

  The panel is equipped with: power switch. When using, align the timer knob from the line to the "on" normally open position, then turn on the power switch, pay attention to the position of the timer knob, and then adjust the speed regulating potentiometer knob according to the required oscillation frequency. The digital display of oscillation speed can determine the required speed according to the display number. The service life of the instrument can be prolonged if it is used at medium speed within the speed range.

4、 Specifications of gyrotron oscillator:

1. Oscillation frequency: start-up -- 300 times / min
2. Oscillation amplitude: 20 mm
3. Power supply: 220 V ± 10 50 Hz
4. Power consumption: 120W
5. Maximum load: 40kg
6. Timing: 0-120 minutes
7. Ambient temperature: normal temperature
8. Relative humidity: < 85%

5、 Note for gyrotron oscillator:

1. The instrument shell should be properly grounded to avoid accidents.
2. It should not be placed in a dry place when the power supply is cut off for a long time.

No video highlights...