Separating funnel oscillator vertical extraction special shaker intelligent instrument speed constant digital display timing

1、 Product features:

  The separator funnel oscillator is the latest product developed and synthesized. Its operation is safe and simple, and the speed of vertical extraction is stable. It is an indispensable laboratory equipment for scientific research, teaching and production departments of plants, biological products, genetics, virus, medicine, environmental protection, etc. The vertical table is equipped with a special fixture, which can hold a variety of test bottles. Under the same conditions, the shaking and stirring are uniform, the center of gravity is stable, no vibration, no movement and no noise. Can use the height adjustable fixture of different size container. It is especially suitable for the cultivation and preparation of biological samples for various comparative tests such as bubble extraction.                   

2、 Main technical parameters                                       

1. Oscillation speed: 50-380r / min, accuracy ± 1 rpm

2. Oscillation mode; up and down strong vibration mode, amplitude: 40mm

3. Power supply: AC 220 V, 50 Hz

4. Vertical load: 10kg, angle adjustable

5. Bottling volume: 100ml ~ 1000ml (6 pieces)

6. Timing: 0 ~ 9999 min or normally open

7. Model: hy-c (digital display)

Safety device: over current protection; when oscillation stops, it will give a prompt sound.

3、 Instructions for use:

1. The service life of the instrument can be prolonged if it is used at medium speed within the speed range.

2. The instrument should be placed on a firm worktable with clean and tidy environment, moderate temperature and good ventilation.

3. Press the speed fast and slow parts to adjust the oscillation frequency, and long press the speed fast / slow key, and the speed will rise rapidly. Or drop, press timing, time division to adjust the oscillation time. It is not necessary to set the time to 00:00. Then press the start key, and the machine runs slowly to the set oscillation frequency. Press the stop key to stop the machine.

For operation, please refer to the instructions for gtcs-2013d speed controller

4、 Maintenance

1. Correct use and attention to the maintenance of the instrument, make it in a good working state, can extend the service life of the instrument.

2. During the continuous operation of the instrument, regular inspection should be carried out every three months: check whether there are water drops and dirt falling on the motor and control elements; check the fuse, control elements and fastening screws.

3. The bearing of the rotating part has been filled with a proper amount of grease (No.1 calcium sodium base) before leaving the factory. During the continuous operation of the instrument, the lubricating grease should be added every six months, and the filling amount accounts for about 1 / 3 of the bearing space

4. The natural wear of the instrument is normal after long-term use. After using the instrument for one year, if it is found that the motor has abnormal noise, the rotating part of the bearing is worn, the belt is loose or cracked, and the electronic control element is invalid The company will continue to provide high-quality services to assist in handling such problems.

Purchasing hotline: 0519-82305398 / 82306938 / 82321286 / 82301086

No video highlights...