Constant temperature shaker zxy-48 intelligent digital display temperature control constant speed constant cultivation welcome to purchase

Introduction to incubator and shaker:

  Constant temperature shaker (also known as air constant temperature shaker) is a kind of biochemical instrument with temperature controlled constant temperature gas box and oscillator. It is an indispensable laboratory equipment for precise cultivation and preparation in scientific research, education and production departments such as plants, biology, microorganism, genetics, virus, environmental protection, medicine, etc.

Its main characteristics are as follows

(1) Intelligent control system;

(2) The forced air circulation is provided with oxygen supply holes;

(3) The panoramic observation window is convenient for observation;

(4) 304 stainless steel universal spring bottle rack is especially suitable for the cultivation and preparation of biological samples for various comparative tests;

(5) Constant speed operation is stable, touch meter operation is simple and safe.

Notice before use
1. Please read this manual carefully before use.

2. The working plane of the machine should not be excessively smooth (e.g. tiles, etc.).

3. The electrical rated parameters of the socket provided by the user shall not be less than that of the machine, and good grounding measures shall be taken.

4. It is forbidden to use the whole machine in direct sunlight.

5. The speed regulation should start slowly from low speed to high speed.

6. The machine may shift when it vibrates at high speed, so it should be watched by someone.

1、 Instructions for constant temperature air bath shaker
1. Fill the test bottle and keep balance. If it is a dual function machine, set the oscillation mode. (see the final figure for detailed settings)

2. Turn on the power supply and set the timing time according to the machine surface scale. If it needs to work for a long time, set the timer to the "normally open" position.

3. Turn on the power switch and set the constant temperature:

(1) Set the small control switch to the "setting" section, and the temperature displayed on the display is the set temperature. Adjust the knob to set the temperature you need. (the working temperature set by you should be higher than the ambient temperature. At this time, the machine starts to heat up and the yellow indicator light is on, otherwise the machine will not work.)

(2) Place the small switch of the control part at the "measurement" end. At this time, the temperature displayed on the display screen is the actual temperature of the air in the test chamber. With the change of the air temperature in the box, the number displayed will also change accordingly.

(3) When heating to the temperature you need, the heating will automatically stop and the green indicator light will be on; when the heat emission in the test chamber is lower than the temperature set by you, a new round of heating will start again.

4. Turn on the oscillation device:

(1) Turn on the oscillation switch on the control panel, and the indicator light will be on.

(2) Adjust the oscillation speed knob to the desired oscillation frequency.

5. After work, cut off the power supply and set the speed control knob and temperature control knob to the lowest point.

6. Clean the machine and keep it clean.

2、 Notes on constant temperature air bath shaker
1. The appliance should be placed on a firm working table, and the environment should be clean and tidy with good ventilation.

2. The power socket provided by users should be well grounded.

3. It is strictly forbidden to move the machine during normal operation.

4. Do not hit the machine.

5. Children are not allowed to approach the machine to prevent accidents.

6. Make sure that the power supply has been cut off before replacing the fuse.

7. Please clean the machine after use, no water drop or dirt remains.

Instrument model: zxy-48
Technical parameters: room temperature: - 50 ℃
Working range: 20mm
Working frequency: 0-300rpm
Timing range: 0-999 minutes
Power: 690w
Working size: 450x360mm
Overall dimension: 680x520x450mm

No video highlights...