Cha-sab cryostat oscillator

1、 Detailed introduction

  Freezing gas bath constant temperature oscillator (also known as air constant temperature shaker) is a kind of biochemical instrument combining temperature controlled incubator and oscillator. It is mainly suitable for oscillation culture of various liquid and solid compounds such as biology, biochemistry, cell, strain and other scientific research departments in Colleges and universities, medical treatment, petrochemical industry, health and epidemic prevention, environmental monitoring, etc.

Its main characteristics are as follows

A: Temperature control precise digital display.

B: The oxygen supply hole and constant temperature working chamber are set up to supply sufficient oxygen.

C: With mechanical timing.

D: The universal spring bottle rack is especially suitable for the cultivation and preparation of biological samples for various comparative tests.

E: Stepless speed regulation, stable operation, simple and safe operation.

F: The inner cavity is made of stainless steel and has good corrosion resistance.

2、 The main technical performance of the refrigerator gas bath thermostatic oscillator is as follows

1. Power supply: 220 V, 50 Hz

2 heating power: 400W cooling power: 500W

3 timing range: 0-120 (or normally open)

4. Oscillation frequency: starting - 300 rpm, adjustable

5 oscillation amplitude: 20 mm

6 constant temperature range: 0-50 ℃

7 oscillation method: Reciprocating

8 temperature control accuracy: + 0.5 ℃

100ml × 24, 200ml × 15, 500mlx8

Refrigeration gas bath thermostatic oscillator: refrigeration and constant temperature regulation, temperature control: 0-50 ℃

Brief introduction of Runhua gas bath oscillator

  Refrigerated gas bath thermostatic oscillator is also known as constant temperature shaker. The temperature control of this series of products adopts advanced system and LED display. High precision temperature control, convenient temperature regulation, accurate and intuitive indication, superior and reliable performance. The incubator is also known as full temperature oscillator. It adopts high-quality fully enclosed compressor and has a large cooling capacity. The box is equipped with fans and devices to force air convection and make the temperature distribution more uniform.

Notice before using refrigerated gas bath thermostatic oscillator:

1. Please read this manual carefully before use.

2. The working plane of the machine should not be excessively smooth (e.g. tiles, etc.).

3. The electrical rated parameters of the socket provided by the user shall not be less than that of the machine, and good grounding measures shall be taken.

4. It is forbidden to use the whole machine in direct sunlight.

5. The speed regulation should start slowly from low speed to high speed.

6. The machine may shift when it vibrates at high speed, so it should be watched by someone.

Operating instructions for refrigerated gas bath thermostatic oscillator:

1. Fill the test bottle and keep balance. If it is a dual function machine, set the oscillation mode. (see the final figure for detailed settings)

2. Turn on the power supply and set the timing time according to the machine surface scale. If it needs to work for a long time, set the timer to the "normally open" position.

3. Turn on the power switch and set the constant temperature:

(1) Set the small control switch to the "setting" section, and the temperature displayed on the display is the set temperature. Adjust the knob to set the temperature you need. (the working temperature set by you should be higher than the ambient temperature. At this time, the machine starts to heat up and the yellow indicator light is on, otherwise the machine will not work.)

(2) Place the small switch of the control part at the "measurement" end. At this time, the temperature displayed on the display screen is the actual temperature of the air in the test chamber. With the change of the air temperature in the box, the number displayed will also change accordingly.

(3) When heating to the temperature you need, the heating will automatically stop and the green indicator light will be on; when the heat emission in the test chamber is lower than the temperature set by you, a new round of heating will start again.

4. Turn on the oscillation device:

(1) Turn on the oscillation switch on the control panel, and the indicator light will be on.

(2) Adjust the oscillation speed knob to the desired oscillation frequency.

5. After work, cut off the power supply and set the speed control knob and temperature control knob to the lowest point.

6. Clean the machine and keep it clean.

Precautions for refrigerated gas bath thermostatic oscillator:

1. The appliance should be placed on a firm working table, and the environment should be clean and tidy with good ventilation.

2. The power socket provided by users should be well grounded.

3. It is strictly forbidden to move the machine during normal operation.

4. Do not hit the machine.

5. Children are not allowed to approach the machine to prevent accidents.

6. Make sure that the power supply has been cut off before replacing the fuse.

7. Please clean the machine after use, no water drop or dirt remains.

No video highlights...