Stainless steel distiller

Product description of stainless steel water distiller

  Runhua stainless steel electrothermal distiller uses electricity to heat drinking tap water. Pure water is produced by distillation, which can be used in medical and health, pharmaceutical, electroplating and laboratory departments. The product is divided into ordinary type and automatic water cut-off type. It is easy to use and easy to operate. It is made of high-quality imported stainless steel material, after special treatment and careful processing. Not only the quality of distilled water is fully guaranteed, but also the service life is greatly prolonged.

（1） Evaporation pan

  This part is made of high-quality stainless steel sheet, rolled, extended and advanced welding method. When the water level in the pot exceeds the limited position, it can overflow automatically. There is an air tight device between the pot body and the pot cover. With a baffle cap, it can effectively prevent the steam from carrying water droplets and affecting the distilled water quality. The scale in the pot can be washed with acid and liquid alkali, which is convenient and thorough. A drain cock is installed on the right side of the pot to drain the water at any time.

（2） Condenser

  This part is made of high-quality stainless steel sheet and international popular stainless steel coil. It has reasonable structure, high heat exchange rate, and is easy to remove and wash internal scale.

（3） Heating part

  This part is composed of immersion type electric heating tube. The electric heating tube is T4 copper sheath, and the surface is plated with pure tin; it is durable; it is installed in the bottom of evaporation pan, and do not cut off water when using!

Maintenance

1. The interior should be washed once a day before use, and the stored water should be drained out, and the fresh water should be replaced, so as to avoid the scale, reduce the water quality and affect the use effect.

2. Impurities in the water source will be left behind after evaporation, especially when the water quality of tap water is poor and has not been treated. After evaporation, there will be sediment < scale > in the pot, which will condense on the wall of the barrel, the surface of the electric heating tube, the inner wall of the condenser shell, and the return pipe, which will not only hinder the smooth flow of the water channel, but also affect the condensation effect, so as to reduce the water production For the electric heating tube, it will also make its heat accumulation and shorten its service life. Therefore, the above-mentioned scales should be removed frequently. The cleaning method: a layer of dirt on the surface can be washed with a brush. However, depending on the combination of dirt, weak acid or weak alkali solution can be used for cleaning. Please pay attention to: do not use too much force to damage parts.

3. The heating element of the distilled water device is a immersed electric heating tube. Its structure is nickel chromium alloy as the main body of heating, buried in the center of the copper tube, surrounded by magnesium oxide as insulation. Therefore, once the water is cut off, the heat can not be absorbed by water, which will cause the copper pipe sheath to break and burn. Therefore, it must be used in water.

4. The distilled water must be operated by a specially assigned person, and it must be explained clearly when the new operator is replaced.

5. The electrical part should be checked regularly and reliably grounded.

6. If the user changes the electric heating pipe by himself due to maintenance, the gasket at the joint must be well padded to ensure no water leakage. Otherwise, it will cause the insulation breakdown of the head of the electric heating tube when it is electrified due to water droplets attached to it. Screw the nut tightly at the connection of each wire head, so as to avoid spark after power on and burn out the head of electric heating tube.

7. The newly purchased distilled water device should be cleaned first, and the internal part should be cleaned after being electrified and evaporated for more than eight hours. After that, it can be used formally to ensure that the water quality meets the requirements (cleaning can be carried out according to 2).

Product features:

1. High quality stainless steel

2. Water cut-off protection and control

3. Automatic water filling device

4. The indicator light shows the working state

5. Console anti scald safety cover

6. Built in shunt control structure

7. Bidirectional easy control pressure regulating valve

8. Easy to operate, safe and reliable

Product specification:

Stainless steel electrothermal distiller [product performance]
1. Stainless steel electrothermal distiller is made according to the national standard. The electric heating tube is used as the heating source, and the common tap water is used as the raw water and cooling water to produce distilled water;

2. Good sealing performance, effectively prevent the leakage of steam;

3. It is made of high quality stainless steel plate by stamping, welding and polishing. It has the characteristics of corrosion resistance, aging resistance, convenient operation and long service life.

Structural features
  本仪器主要由冷凝器、蒸发锅、电热管三部分组成。主体材料均采用不锈钢薄板与不锈钢无缝管制成，外形美观。电加热管采用浸入式电热管热效率高。The instrument is mainly composed of condenser, evaporation pot and electric heating tube. The main materials are made of stainless steel sheet and stainless steel seamless pipe, with beautiful appearance. The electric heating tube adopts immersion type electric heating tube with high thermal efficiency.

Operating procedures for stainless steel electrothermal distiller:

preparation

1. Before use, brush the inside of the distiller and replace the water stored overnight with clean water.

2. Close the drain valve

3. Prepare enough clean containers to connect the distilled water from the water outlet.

Operation steps
1. Connect the water source to the water inlet pipe of the distiller to make the water enter the condenser. Then it is injected into the evaporation pan from the return pipe. Until the water level rises to the center of the glass water gauge.

2. Turn on the power supply and open the large water inlet valve after the water in the evaporation pot boils.

3. Adjust the size of water source to make the distilled water output maximum.

4. In order to ensure the purity of the effluent, after 10 minutes of water outflow from the water outlet, the container is used to connect distilled water.

Precautions for laboratory water distiller:
1. The tap water used for the preparation of distilled water should meet the requirements of hygienic standard for drinking water.

2. Do not close the working power switch when the evaporation pan is not filled with water or the overflow device is not discharged.

3. When the distilled water device works, due to the unstable water source pressure, the distilled water output and cooling water flow may change greatly. Users should observe and adjust the water volume to the specified water level of the overflow device.

4. When the overflow rubber outlet pipe is connected with the overflow device interface, the overflow water at the other end of the rubber pipe must be discharged directly in use, and the drainage of the rubber pipe must be smooth and downward, and its bending angle must be greater than 90 degrees, otherwise the water level of the overflow device will be unstable.

5. Before use every day, the evaporation pan should be washed, the stored water should be drained, and the fresh water should be replaced to ensure the water quality.

6. The scale in distilled water can be washed with weak acid or alkali solution.

7. The newly purchased distilled water device should be cleaned first and evaporated by water injection for more than 2 hours until the distilled water meets the requirements. Do not cut off water during use.

8. When the distilled water device is working, its surface temperature is high. Do not touch it to prevent scalding.

9. The rubber seal will be aged after using for a long time, so the user should replace it in time.

10. If you need to purchase spare parts and other matters, please contact our company.

No video highlights...