DB-3 stainless steel electric heating plate

1、 Product introduction

  Stainless steel electric heating plate is widely used for baking, drying and other temperature tests of samples. It is a necessary tool for biology, genetics, medicine and health, environmental protection, biochemical laboratory, analysis room, education and scientific research

Its main characteristics are as follows

1. The heater is made by special molding process, and there is no warping deformation at high temperature.

2. The working panel is made of stainless steel, which has superior corrosion resistance and even working surface temperature.

3. It is easy to operate and safe to use.

2、 Technical indicators of similar products:

Note: type B with digital display temperature control function, without type B for open direct heating, no temperature control.

3、 Operating instructions

1. Set temperature: press the set key to set the temperature. Press the set key to set the temperature. Press the set key to set the temperature of the instrument. Press the Δ key to increase the setting value, press the ▽ key to decrease the setting value. Press the increase or decrease key continuously to set the temperature rapidly. Once again, the instrument returns to the normal working state and the temperature is set.

2. Sensor error correction: when reconfirming that the value displayed by the instrument is not the correct measurement value, the displayed value can be corrected. Press set key for 3 seconds, and the instrument will enter the inner menu. After the parameter SC is selected, this parameter can be modified by using the Δ or ▽ keys. The correction range of sensor error is from + 50 ℃ to - 50 ℃. After correction, press set key for 3 seconds to exit. The correction value of the instrument is 0 when it is delivered from the factory. It is necessary to prevent the instrument with correct display from being corrected to incorrect.

3. Start up self-tuning: This product can adapt to most control systems. Only when the control effect is not ideal can self-tuning be started. Press set key for 3 seconds to enter the inner menu of the instrument. After selecting the parameter at, cooperate with the Δ or ▽ key to start self-tuning. At this time, the at indicator light starts to flash, and the instrument enters the automatic setting parameter working state. The instrument control heating system fluctuates two times around the set point When the at light is off, the self-tuning is finished, and the new PID parameters are locked in the chip.

Use and precautions of stainless steel electric heating plate:
1. Please wipe the working face clean before use, and there are no water drops, dirt, scale and other foreign bodies on it.

2. Turn on the power supply, turn on the power switch, the indicator light is on, the temperature control type sets the required temperature value, and the electric heating plate is in working state.

3. When the electric heating plate is in working state, special personnel shall be assigned to take care of it.

4. After work, turn off the power switch and cut off the power supply.

5. When the working face is not completely cooled, please do not place inflammable and explosive articles on the worktable.

About instrument customization and Reservation:
  Customers who need customized instruments should have specific technical parameters and requirements in writing and fax them to the company. After both parties reach a consensus, we can only produce the customized instruments. We must prepay 60% of the deposit for the customized instruments. Due to the particularity of the instruments, we need to carry out the necessary parameter and function test before leaving the factory. Only the instruments that have been tested successfully can be delivered to you We are sorry for the delay of 2-3 days due to late delivery or shortage.

  Changzhou Runhua Electric Appliance Co., Ltd. is a scientific and technological enterprise integrating R & D, production, sales and service. Specialized in: research and development, production, sales and service of teaching and experimental instruments, medical and health equipment, petrochemical equipment, microbial cultivation equipment, biochemical pharmaceutical equipment. The products are sold well in Colleges and universities, biological products research institutes, hospitals, epidemic prevention, petrochemical, environmental testing and other scientific research institutions, and exported in large quantities. In line with the spirit of scientific and technological innovation, honesty and pragmatism, the company abides by its promise, bases itself on the market with its brand, quality, reputation and service. Runhua always adheres to the principle of "quality first, customer first". Always to meet the needs of users as the purpose, constantly take the needs of users as the guide, constantly develop new generation products, strive to create value for customers, and serve customers wholeheartedly.

  The company is looking for agents all over the country. Welcome to contact us and visit our factory.

No video highlights...