Stainless steel electric heating plate db-1b

1、 Product introduction

1. The heater is made by special molding process, and there is no warping deformation at high temperature.

2. The working panel is made of stainless steel, which has superior corrosion resistance and even working surface temperature.

3. It is easy to operate and safe to use.

4、 Operating instructions

1. Set temperature: press the set key to set the temperature. Press the set key to set the temperature. Press the set key to set the temperature of the instrument. Press the Δ key to increase the setting value, press the ▽ key to decrease the setting value. Press the increase or decrease key continuously to set the temperature rapidly. Once again, the instrument returns to the normal working state and the temperature is set.

2. Sensor error correction: when reconfirming that the value displayed by the instrument is not the correct measurement value, the displayed value can be corrected. Press set key for 3 seconds, and the instrument will enter the inner menu. After the parameter SC is selected, this parameter can be modified by using the Δ or ▽ keys. The correction range of sensor error is from + 50 ℃ to - 50 ℃. After correction, press set key for 3 seconds to exit. The correction value of the instrument is 0 when it is delivered from the factory. It is necessary to prevent the instrument with correct display from being corrected to incorrect.

3. Start up self-tuning: This product can adapt to most control systems. Only when the control effect is not ideal can self-tuning be started. Press set key for 3 seconds to enter the inner menu of the instrument. After selecting the parameter at, cooperate with the Δ or ▽ key to start self-tuning. At this time, the at indicator light starts to flash, and the instrument enters the automatic setting parameter working state. The instrument control heating system fluctuates two times around the set point The new PID parameters are locked in the chip when the at light is off.