Welcome to visit Changzhou Runhua Electric Co., Ltd. Official website!
TEL

0086-519-82305398

Current location:Home > Products > Agitator series > Electric Blender
PRODUCTS
  • Electric agitator jj-1 (100W) power increasing type can be continuously stirring speed control timing

Electric agitator jj-1 (100W) power increasing type can be continuously stirring speed control timing

Overview:1、 Introduction: In order to meet the needs of modern laboratory new scientific research projects, the electric stirrer developed and produced by our factory adopts permanent magnet DC motor and advanced power amplifier circuit. It has the characteri…

Consulting

1、 Introduction:

  In order to meet the needs of modern laboratory new scientific research projects, the electric stirrer developed and produced by our factory adopts permanent magnet DC motor and advanced power amplifier circuit. It has the characteristics of stepless speed regulation, low noise, large torque and no need to replace carbon brush. It is an indispensable basic equipment for Colleges, universities, scientific research units, chemical and pharmaceutical units, and is deeply loved by the majority of users.

 

2、 Parameters and performance

1. Power supply: 220 V, 50 Hz, timing range: 0-120 / min (with type A for digital speed measurement) for selection

2. Motor power: 60W 80W 90W 100W 120W 160W 200W 300W [select when purchasing]

3. Speed regulation range: 0 ~ 3000 rpm, stepless speed regulation, adjustable speed.

4. Package size: 60w-120w (44 * 31.5 * 15cm) 160w-300w (48 * 35.5 * 21.5cm)

5. Instrument size: (60-120w) 410 * 260 * 700mm. (160w-300w) 430 * 300 * 700mm


 

3、 How to use it

  First of all, support the mixing rod on the motor shaft fixture, and adjust the speed control knob to the lowest speed position. Place the solution to be stirred at the center of the mixing bar. Turn on the power switch. When timing operation is required, select the required time or normally open, and slowly rotate the speed control knob clockwise to reach the speed you need to stop.

 

4、 Precautions:

  To a certain extent, the speed of the electric mixer will be affected by the voltage and current. If the voltage or current of the unit is unstable, please use the surge socket,] the grounding wire must be used. If the mixing rod is not concentric or unstable during operation, please turn off the power supply and adjust the clamp to make the mixing rod concentric. The medium speed mixing can reduce the vibration, To prolong the service life, the instrument should be kept dry, clean and hygienic.


Manufacturer's long-term special offer purchase hotline: 0519-82305398 / 82301086 / 82306938 / 82321286

}
Video

    No video highlights...
Photo
No photo collection...
Customer
Flash Demo

Project
No related case...
Related articles
Related products
Consulting

Copyright 2020 Changzhou Runhua Electric Co., Ltd. Copyright Design by:EastNet [Manage]
Top