Six electric stirrer multi head electric stirrer manufacturer direct selling independent speed control digital display

1、 Introduction:

  In order to meet the needs of laboratory staff, jj-4ab is based on the synchronization of six synchronous agitators jj-4. The six agitators work separately and can control the speed separately and measure the speed separately. The combined manufacturing of six digital speed measuring electric agitators is formed. The design is reasonable and the structure is novel. The brushless DC motor is adopted and the speed regulation is stepless It has the advantages of stable speed, big torque, low noise, intuitionistic revolution display, simple and safe operation. It is an essential basic equipment for colleges and universities, scientific research units and chemical engineering units.

(friendly reminder: users who need low speed and constant speed, please have our sales instructions: 0519-82305398) thank you!

2、 Technical parameters:

Working power supply: 220V50 Hz
Asynchronous power: 100W * 6
Timing range: 0-120min
Speed regulation range: 0-3000r / min
Speed measurement range: start - 3000 rpm
Overall power: 700W, sustainable operation

3、 How to use it

  First of all, support the mixing rod on the motor shaft clamp, and adjust the speed control knob to the lowest speed position, place the solution to be stirred in the center of the mixing bar, turn on the power switch, and select the required time or normally open when timing operation is required. If the stirred solution is dilute, the speed can be adjusted to 500 rpm. If the solution is viscous, the speed should be adjusted to 600-3000 rpm.

4、 Precautions

1. The ground wire must be grounded when using. If the mixing rod is not concentric or unstable, please turn off the power supply, adjust the clamp and clamp to make the mixing rod concentric.

2. Medium speed stirring can reduce vibration and prolong service life. The instrument should be kept dry and clean.

No video highlights...