Magnetic stirrer jb-6 stainless steel six position six connection magnetic stirrer

Brief introduction of jb-6 magnetic speed measuring agitator

  Jb-6 multi head magnetic speed measuring agitator is widely used in Colleges and universities, environmental protection, scientific research, health and epidemic prevention, petrochemical industry, metallurgy, medical and other departments. It has good performance, no noise, no vibration, and remarkable mixing effect. It is an ideal and necessary tool for laboratory technicians

2、 Technical parameters:

1. Electric source: single phase AC, 50 Hz, 220 V ± 10 v
2. Motor power: 40W × 6
3. Stepless speed regulation: 0 ~ 2400 rpm
4. Worktable: stainless steel (surface oxidation resistance)
5. Mixing mode: six station magnetic stirring, with independent speed control and speed measurement
7. Mixing capacity: 5000mlx6
8. Instrument material: all stainless steel
9. Speed measurement range: start-up - 2400r / min
10. Overall dimension: 605 * 405 * 116mm

3、 Usage:

  When using the instrument, first check whether the accessories are complete, and then install the fixture in order, put the required solution into the beaker or flask, and then put the stirrer in the center of the chromium plating plate. Plug in the power supply, turn on the power switch, and the indicator light is on to indicate that the power source is connected, Turn on the working switch and the indicator light is on. Adjust the speed control knob from left to right (from low speed to high speed) to select the mixing speed you need. It is not allowed to start at high speed directly, so as to prevent the agitator from being out of sync and causing jumping. Cut off the power supply after use. In order to ensure safety, please ground the instrument. Keep the instrument clean and dry. Do not allow solution into the machine to avoid damage to the machine parts

4、 Precautions:

a) Mixing time should not be too long, intermittent use can prolong life

b) It can work continuously at medium speed and 8 hours at high speed

c) Please read the manual carefully for correct use

d) If it is not used for a long time, please wipe it and put it in a dry and ventilated place

Procurement consulting center: 0519-82301086 82321286 82305398 82306938

No video highlights...