Constant temperature magnetic stirrer 85-2 / 85-2a digital display constant temperature speed measurement conventional instrument price is affordable

1、 Introduction

  The thermostatic stirrer adopts high quality DC brushless motor with low noise and stable speed regulation. The fully enclosed stainless steel heating plate can be used as auxiliary heating and can be used for long-term heating. The agitator is made of PTFE and high quality magnetic steel, which has the functions of high temperature resistance, corrosion resistance and strong magnetism. It can be stirred in a closed container and is very convenient to use. The agitator can set the temperature and speed display, and the digital display is intuitive and accurate.

2、 Performance of 85-2 / 85-2a constant temperature magnetic stirrer:

1. Power supply single phase AC 50 Hz 220 V
2. Motor type: brushless motor
3. Power: 300W
4. Stepless speed regulation: 0-2400 rpm
5. Digital display temperature control range: normal temperature - 100 ℃, accuracy ± 0.5 ℃
6. Heating mode: stainless steel heating plate with digital display and temperature control
7. Maximum mixing capacity: 0-1000ml [according to different containers]
8. Overall dimension: 240x190x130mm
9. Instrument model: 85-2 / 85-2a [speed display with a]

3、 Usage of constant temperature magnetic stirrer:

  When using the instrument of our company, please first check whether the accessories are complete. Put the beaker or other containers to be stirred in the middle of the mixing tray, add the solution, put the stirrer in the beaker, and then plug in the power plug of the instrument. If it is a digital temperature control instrument, please put the sensor into the beaker. Please connect the plug, prop and accessories between the parts Appropriate water, turn on the power switch, turn on the speed control switch according to your own requirements, adjust the mixing speed, set the temperature. Please install the set key, enter the temperature setting mode, and see the number flashing. In the setting mode, press and hold the arrow up button, the temperature number is rising, press and hold the down arrow button, the temperature number is falling until it is adjusted to the temperature you need After finishing, press the set setting button to enter the heating operation. Then press the set button to exit the setting mode and return to the normal working measurement mode. The speed regulation is gradually adjusted from low speed to high speed. It is not allowed to start the high speed gear directly, so as to prevent the agitator from jumping out of synchronization. Heating can not be done without stirring. The heating is controlled by band switch, and the power supply should be cut off when it is not working. The instrument should be kept clean and dry, and no solution is allowed to enter the machine

4、 Matters needing attention of double digital display constant temperature magnetic stirrer

(1) When mixing, if the stirrer jumps or does not stir, check whether the beaker is stable and the position is correct.

(2) Medium speed operation can prolong service life

(3) Please connect the ground wire when using

5、 List of double digital display constant temperature magnetic stirrer

1. 1 complete machine

2. 1 stirrer

3. 1 chrome plated vertical pole

4. 1 chrome plated cross joint

5. 1 rubber chuck

6. Two bakelite supporting screws

Changzhou Runhua Electric Appliance Co., Ltd
Address: No.26, Jinsheng East Road, Jintan City, Jiangsu Province
Tel: 0519-82305398 Fax: 0519-823069
website: www.runhuayiqi.com
Email: 394514722@qq.com

No video highlights...