Welcome to visit Changzhou Runhua Electric Co., Ltd. Official website!
TEL

0086-519-82305398

Current location:Home > Products > Agitator series > A magnetic stirrer
PRODUCTS
  • Hj-5 multifunctional agitator

Hj-5 multifunctional agitator

Overview:Hj-5 digital display multifunctional agitator The multi-functional agitator integrates the functions of magnetic heating agitator, constant temperature magnetic heating agitator and electric agitator. The magnetic heating stirring and electric stirrin…

Consulting
Hj-5 digital display multifunctional agitator

  The multi-functional agitator integrates the functions of magnetic heating agitator, constant temperature magnetic heating agitator and electric agitator. The magnetic heating stirring and electric stirring can be carried out on the same machine, and both can accurately and stably stir the liquid solution in a wide range of speed. The operation is simple, the operation is stable, stepless speed regulation is stepless, and the temperature control is accurate. It is especially suitable for small volume liquid with different viscosity The same machine test operation of solution is a necessary tool for petroleum, chemical, medical and health, environmental protection, biochemical laboratory, analysis room and education department.


model

Speed regulation range (RPM)

Temperature range

Temp Accuracy

Working face diameter (mm)

Motor power

Mixing capacity

heating power

Instrument dimension (mm)

HJ-5

Magnetic force: starting - 2400r / min

Room temperature - 100 ℃

±1℃

∮130

35W

40W

100-1000ml

150W

350×210×600

Electric - 3000r / min


characteristic:

  The instrument adopts permanent magnet DC motor and has the function of independent magnetic stirring and electric stirring. The speed is stable, noiseless and continuously adjustable. The stirrer and stirrer have corrosion resistance. With constant temperature heating device, the temperature can be selected according to the working requirements. The instrument is simple to operate and convenient to work. It is a regular and necessary product for universities, scientific research institutions and laboratories.


Technical parameters:

1. Power supply: 220 V ± 10% 50 Hz

2. Magnetic stirring power: 35W, electric stirring power: 40W

3. Heating power: 200W

4. Temperature control range: room temperature - 100 ℃

5. Speed: magnetic 0-2400 RPM stepless speed regulation, electric 0-3000 rpm

6. Working table diameter: 125mm

7. Package dimension: 500 * 290 * 220mm


usage method:

1. Install the random accessories, tighten the main support rod with the diameter of 16mm, support each plug-in of the motor, and insert them according to the position.

2. Plug in the power supply, turn on the switch, and select magnetic stirrer or electric mixer according to the working requirements, and the speed will gradually increase from slow to fast.

3. When selecting the temperature, put the temperature sensor rod into the liquid. The upper row of the display is the actual temperature of the container, and the lower row is the selected (or preset) test temperature. To this end, press the bottom right foot o to indicate the three digit character in the lower row, and the number of the most right digit is constantly flashing. Press + to increase, press to decrease to set the temperature to be tested, and then press o to make the temperature control device of the instrument digital display enter the working state, However, it must be noted that the set temperature must be high enough for the heater to heat up. At the same time, the red light will be on when heating, and the constant temperature state will be implemented when the set temperature is reached.



matters needing attention:

1. The power socket should have reliable grounding wire for safety.

2. Heating can not be empty burning, so as not to burn the heating plate.

3. Adjust the temperature to no pad when heating is not needed.

4. Do not fill up the liquid too much in order to prevent it from seeping into the instrument and damaging the original device or being damaged.

5. After work, turn off the power supply, turn off the temperature control and electric switch, plug in the instrument and place it in a ventilated and dry place.



Changzhou Runhua mainly produces the following varieties:

  A variety of digital display constant temperature biochemical, light incubator, refrigeration constant temperature oscillation incubator, digital display electrothermal constant temperature incubator, vacuum, blast drying oven, carbon dioxide incubator, constant temperature and humidity incubator, salt spray test chamber, water separation incubator, multi-functional refrigeration water bath, air bath oscillation shaker, various magnetic, electric, speed measuring multi-functional agitators, constant speed strong electric stirrer, high-speed and high-speed electric mixer Temperature digital display heat collecting stirrer, large capacity and high power magnetic stirrer, various water bath pots, super digital constant temperature circulating water tank, internal and external circulation oil bath pan, various high and low speed centrifuges, various water bath, gas bath digital display thermostatic oscillator, various reciprocating, gyratory oscillation shakers, extraction vertical purification oscillator, double-layer large multi-function oscillator, large-scale frozen air shaker, planting There are more than 100 kinds of laboratory instrument products, such as tissue mashing homogenizer, high-speed disperser, various digital display electric heating plate, constant temperature stage, micro oscillator, vortex mixer, penicillin rapid mixer, decolorizing shaker, low temperature vertical water tank, analysis and detection.

}
Video

    No video highlights...
Photo
No photo collection...
Customer
Flash Demo

Project
No related case...
Related articles
Related products
Consulting

Copyright 2020 Changzhou Runhua Electric Co., Ltd. Copyright Design by:EastNet [Manage]
Top