Constant temperature water tank hh-w intelligent digital display temperature control high quality 304 stainless steel circular working chamber factory direct sales

1、 Brief introduction of the instrument

Constant temperature water tank is a comprehensive product of water bath pot, water temperature box and boiling disinfection box. It is suitable for biochemical experiments of distillation, drying, concentration and constant temperature heating of chemical drugs, biological products and serum examination. It can be used for boiling disinfection of syringes and small surgical instruments. The instrument has the characteristics of excellent material selection, reasonable structure, beautiful appearance, economic, practical, easy operation, convenient maintenance and so on. It is an ideal test equipment.

2、 Structural features:

The shell of the constant temperature water tank is formed by high-temperature spraying of high-quality cold-rolled sheet. The inner tank and upper cover are made of high-quality thickened 304 stainless steel liner. The heating mode is U-type fire-h-type immersion heating tube, and the temperature is controlled by p.i., D, The sensor is platinum PT100, with room temperature alarm function, digital: LED display, intuitive and accurate reading, in the experimental range of use can be adjusted according to their own experimental temperature requirements.

3、 Instrument parameters:

1. Heating power: 3kw
2. Working volume: diameter 500X height 500mm
3. Working power supply: 220 V, 50 Hz
4. Constant temperature range: room temperature - 100 ℃
5. Dimension: 600 * 600 * 620mm
6. Temperature control accuracy: ± 0.5 ℃
7. With drain valve: bottom drainage [thorough]
8. Temperature control fluctuation: 0.1 ℃
9. Temperature control uniformity: 0.1 ℃

4、 Usage:

  When using, water must be added into the pot first, and then the power supply is connected. To set the temperature, press the set key to enter the temperature setting mode to set or view the set value. Press the set key to see the number flashing. In the setting mode, press the up button to increase the setting value and the down button to decrease the setting value. If you keep pressing the button, it will increase or decrease to the value you need. After setting, press the set button again to exit the setting mode and return to the normal working measurement mode.

Please note that:

  The following parameters have been adjusted by our company technically. There are no special requirements. Try not to change the parameters that have been set before delivery, so as to avoid errors in use. Thank you. After setting all parameters, press set key to return to normal working state. Do not add too much water in the pot, so as to avoid water overflowing out of the boiler when boiling. Pay attention to that the water in the pot can not make the electric heating pipe out of the water surface, so as to avoid burning the electric heating pipe and causing water leakage.

5、 Precautions:

  If you have any questions when using the heating function, please read the instrument manual carefully! This instrument adopts three pin safety plug. Please use the safe three hole socket and properly grounded. Since the water temperature of the water tank is relatively high when heating, when you need to use a thermometer to measure, you must wait until the water temperature is stable. There is a stainless steel metal sensor in the middle of the heating pipe. Do not collide and move it to avoid temperature control failure.

Purchasing hotline: 0519-82305398 82301086 82306938

No video highlights...