Constant temperature box for battery experiment hh-q601 intelligent temperature control cold air transmission

1、 Introduction:

  Hh-q601 high and low temperature incubator (also known as high and low temperature air shaker) is widely used in the high and low temperature test of various batteries and power storage products, as well as the test of thermal expansion, cold contraction and potential difference. It is an ideal experimental instrument for electrochemical detection of high and low temperature. The instrument adopts DC brushless motor for smooth wind speed circulation, long service life, constant torque, constant speed and maintenance free. Concept aesthetic design, with double-layer constant temperature insulation cover, the inner tank and inner table are made of anti bacteria stainless steel, which is easy to clean and the surface is anti-oxidation. The unique speed control circuit ensures the wind speed to start slowly and accelerate steadily, which can prevent liquid splashing and ensure the safety of experimental samples.

2、 Features of incubator:

 1. the insulation material of the box is polyurethane foam, which has strong anti-interference ability to the external cold (hot) source.

2. Air duct is set in the working chamber, and the temperature distribution is uniform

3. The inner wall is made of 304 stainless steel with good corrosion resistance

4. The heating system is from normal temperature to - 100 ℃

5. Special stainless steel bottle with cover is suitable for comparison test of various products

6. Accurate temperature control, microcomputer LED digital display

3、 Technical parameters
1. Main application: used for multi-purpose high and low temperature testing of samples.

2. Working condition: working voltage: 220 V, 50 Hz

3 working environment: working temperature: - 15-65 degrees; relative humidity: < 65%.

4、 Technical indicators:
1. The automatic control implemented by microprocessor makes the temperature reach the set value quickly and ensures the stability of these parameters during operation.

2. The LED display clearly reflects the setting parameters and operation status.

3. Temperature control range: normal temperature - 100 ℃

4. Temperature control accuracy: ≤ 0.1 ℃

5. Temperature uniformity: ≤± 0.1 ℃

6. Digital display mode: microcomputer LED intelligent digital display temperature control

7. Overall dimension: 850 × 460 × 350mm

8. Volume: diameter 50 mm × 100 mm x 16 pieces

9. Weight: 30kg

10. Equipped with 16 professional 304 stainless steel cups]

11. 16 304 stainless steel cup covers

5、 Operating instructions for incubator:

1. The instrument should be placed on the flat ground, the environment should be clean and tidy, dry and ventilated.

2. Before using the instrument, all control switches should be in non working state

3. First, the stainless steel culture bottles should be packed, and the culture medium of each bottle should be approximately equal. Cover with stainless steel flat cover.

4. Turn on the external power supply, turn the power switch to the "on" position, and the indicator light will be on.

5. Select the culture temperature: please refer to the instruction manual.

6. Before each shutdown, all control switches should be in non working state and cut off the power supply.

6、 Maintenance:

1. Correct use and attention to the maintenance of the instrument, make it in a good working state, can extend the service life of the instrument.

2. After stopping working, clean the working chamber with a soft cloth.

3. During the continuous operation of the instrument, regular inspection should be carried out every three months. If dirt falls on the stainless steel table, check the fuse, control elements and fastening screws. After one year's use, the company will continue to provide quality service and lifelong maintenance.

5. If the above air incubator can not meet your requirements, we can produce customized products according to the requirements.

No video highlights...