Zd-85 multifunctional gas bath thermostatic oscillator

1、 Brief introduction of zd-85 multifunctional gas bath thermostatic oscillator

  The multifunctional air bath thermostatic oscillator (also known as air thermostatic shaker) is a kind of thermostatic gas box and oscillator with controllable temperature

  The combined biochemical instrument is an indispensable laboratory equipment for precise cultivation and preparation in scientific research, education and production departments such as plant, biology, microorganism, genetics, virus, environmental protection and medicine.

Its main characteristics are as follows

(1) Accurate temperature control and digital display;
(2) Oxygen supply holes are set up;
(3) With mechanical timing;
(4) The universal spring bottle rack is especially suitable for the cultivation and preparation of biological samples for various comparative tests;
(5) Stepless speed regulation, stable operation, simple and safe operation.

2、 Technical specifications of zd-85 multifunctional gas bath thermostatic oscillator
1. Please read this manual carefully before use.

2. The working plane of the machine should not be excessively smooth (e.g. tiles, etc.).

3. The electrical rated parameters of the socket provided by the user shall not be less than that of the machine, and good grounding measures shall be taken.

4. It is forbidden to use the whole machine in direct sunlight.

5. The speed regulation should start slowly from low speed to high speed.

6. The machine may shift when it vibrates at high speed, so it should be watched by someone.

3、 Operation instructions of zd-85 multifunctional gas bath thermostatic oscillator
1. Fill the test bottle and keep balance. If it is a dual function machine, set the oscillation mode. (see the final figure for detailed settings)

2. Turn on the power supply and set the timing time according to the machine surface scale. If it needs to work for a long time, set the timer to the "normally open" position.

3. Turn on the power switch and set the constant temperature:

(1) Set the small control switch to the "setting" section, and the temperature displayed on the display is the set temperature. Adjust the knob to set the temperature you need. (the working temperature set by you should be higher than the ambient temperature. At this time, the machine starts to heat up and the yellow indicator light is on, otherwise the machine will not work.)

(2) Place the small switch of the control part at the "measurement" end. At this time, the temperature displayed on the display screen is the actual temperature of the air in the test chamber. With the change of the air temperature in the box, the number displayed will also change accordingly.

(3) When heating to the temperature you need, the heating will automatically stop and the green indicator light will be on; when the heat emission in the test chamber is lower than the temperature set by you, a new round of heating will start again.

4. Turn on the oscillation device:

(1) Turn on the oscillation switch on the control panel, and the indicator light will be on.

(2) Adjust the oscillation speed knob to the desired oscillation frequency.

5. After work, cut off the power supply and set the speed control knob and temperature control knob to the lowest point.

6. Clean the machine and keep it clean.

4、 Precautions for zd-85 multifunctional gas bath thermostatic oscillator
1. The appliance should be placed on a firm working table, and the environment should be clean and tidy with good ventilation.

2. The power socket provided by users should be well grounded.

3. It is strictly forbidden to move the machine during normal operation.

4. Do not hit the machine.

5. Children are not allowed to approach the machine to prevent accidents.

6. Make sure that the power supply has been cut off before replacing the fuse.

7. Please clean the machine after use, no water drop or dirt remains.

  Gas bath thermostatic oscillator is also known as constant temperature shaker. The temperature control of this series of products adopts advanced system and LED display. High precision temperature control, convenient temperature regulation, accurate and intuitive indication, superior and reliable performance. Air bath thermostatic oscillator, incubator, there are lighting devices in the workroom for easy observation. Oscillation incubator is also known as full temperature oscillator.

Detailed introduction

Characteristics of gas bath thermostatic oscillator:

   gas bath thermostatic oscillator is also known as constant temperature shaker. The temperature control of this series of products adopts advanced system and LED display. High precision temperature control, convenient temperature regulation, accurate and intuitive indication, superior and reliable performance. The incubator is also known as full temperature oscillator. There are fans and devices in the incubator to force air convection and make the temperature distribution more uniform.

Gas bath thermostatic oscillator purpose:

   air bath thermostatic oscillator is suitable for environmental protection, medical teaching, health and epidemic prevention, drug inspection, zoobotany, marine science, food engineering and other scientific research and production departments. It is a special constant temperature equipment with oscillator for BOD determination of water analysis, cultivation and preservation of bacteria, viruses, molds and microorganisms, plant cultivation and breeding test.

Main technical parameters of gas bath thermostatic oscillator product features:
  Air bath constant temperature oscillator (also known as air constant temperature shaker) is a kind of biochemical instrument which combines temperature controlled incubator and oscillator. It is mainly used for oscillation culture of various liquid and solid compounds such as biology, biochemistry, cell, strain and other scientific research departments in Colleges and universities, medical treatment, petrochemical industry, health and epidemic prevention, environmental monitoring, etc. Its main features: A: temperature control precise digital display. B: The oxygen supply hole and constant temperature working chamber are set up to supply sufficient oxygen. C: With mechanical timing. D: The universal spring bottle rack is especially suitable for the cultivation and preparation of biological samples for various comparative tests. E: Stepless speed regulation, stable operation, simple and safe operation. F: The inner cavity is made of stainless steel and has good corrosion resistance.

The main technical performance of gas bath thermostatic oscillator is as follows

1. Power supply: 220 V, 50 Hz
2. Power: 690w
3. Timing range: 0-120 min (or normally open)
4. Oscillation frequency: starting - 300 rpm, adjustable
5. Oscillation amplitude: 20 mm
6. Constant temperature range: room temperature - 50 ℃
7. Oscillation method: Reciprocating + gyratory dual function type
8. Temperature control accuracy: 0.5 ℃

Before using the gas bath thermostatic oscillator:

1. Please read this manual carefully before use.
2. The working plane of the machine should not be excessively smooth (e.g. tiles, etc.).
3. The electrical rated parameters of the socket provided by the user shall not be less than that of the machine, and good grounding measures shall be taken.
4. It is forbidden to use the whole machine in direct sunlight.
5. The speed regulation should start slowly from low speed to high speed.
6. The machine may shift when it vibrates at high speed, so it should be watched by someone.

Operating instructions for gas bath thermostatic oscillator:

1. Fill the test bottle and keep balance. If it is a dual function machine, set the oscillation mode. (see the final figure for detailed settings)

2. Turn on the power supply and set the timing time according to the machine surface scale. If it needs to work for a long time, set the timer to the "normally open" position.

3. Turn on the power switch and set the constant temperature:

(1) Set the small control switch to the "setting" section, and the temperature displayed on the display is the set temperature. Adjust the knob to set the temperature you need. (the working temperature set by you should be higher than the ambient temperature. At this time, the machine starts to heat up and the yellow indicator light is on, otherwise the machine will not work.)

(2) Place the small switch of the control part at the "measurement" end. At this time, the temperature displayed on the display screen is the actual temperature of the air in the test chamber. With the change of the air temperature in the box, the number displayed will also change accordingly.

(3) When heating to the temperature you need, the heating will automatically stop and the green indicator light will be on; when the heat emission in the test chamber is lower than the temperature set by you, a new round of heating will start again.

4. Turn on the oscillation device:

(1) Turn on the oscillation switch on the control panel, and the indicator light will be on.

(2) Adjust the oscillation speed knob to the desired oscillation frequency.

5. After work, cut off the power supply and set the speed control knob and temperature control knob to the lowest point.

6. Clean the machine and keep it clean.

Precautions for gas bath thermostatic oscillator:

1. The appliance should be placed on a firm working table, and the environment should be clean and tidy with good ventilation.

2. The power socket provided by users should be well grounded.

3. It is strictly forbidden to move the machine during normal operation.

4. Do not hit the machine.

5. Children are not allowed to approach the machine to prevent accidents.

6. Make sure that the power supply has been cut off before replacing the fuse.

7. Please clean the machine after use, no water drop or dirt remains.

No video highlights...