Welcome to visit Changzhou Runhua Electric Co., Ltd. Official website!
TEL

0086-519-82305398

Current location:Home > Products > Oscillator series > Gas bath thermostatic oscillator
PRODUCTS
  • Cha-s (a) gas bath thermostatic oscillator

Cha-s (a) gas bath thermostatic oscillator

Overview:1、 Brief introduction of cha-s gas bath thermostatic oscillator Air bath thermostatic oscillator (also known as air thermostatic shaker) is a kind of thermostatic gas box and oscillator with controllable temperatureThe combined biochemical instrument…

Consulting

1、 Brief introduction of cha-s gas bath thermostatic oscillator

  Air bath thermostatic oscillator (also known as air thermostatic shaker) is a kind of thermostatic gas box and oscillator with controllable temperature

  The combined biochemical instrument is an indispensable laboratory equipment for precise cultivation and preparation in scientific research, education and production departments such as plant, biology, microorganism, genetics, virus, environmental protection and medicine.


Its main characteristics are as follows

(1) Accurate temperature control and digital display;
(2) Oxygen supply holes are set up;
(3) With mechanical timing;
(4) The universal spring bottle rack is especially suitable for the cultivation and preparation of biological samples for various comparative tests;
(5) Stepless speed regulation, stable operation, simple and safe operation.



2、 Technical specifications of cha-s gas bath thermostatic oscillator
  Notice before use
1. Please read this manual carefully before use.
2. The working plane of the machine should not be excessively smooth (e.g. tiles, etc.).
3. The electrical rated parameters of the socket provided by the user shall not be less than that of the machine, and good grounding measures shall be taken.
4. It is forbidden to use the whole machine in direct sunlight.
5. The speed regulation should start slowly from low speed to high speed.
6. The machine may shift when it vibrates at high speed, so it should be watched by someone.


3、 Instructions for cha-s gas bath thermostatic oscillator
1. Fill the test bottle and keep balance. If it is a dual function machine, set the oscillation mode. (see the final figure for detailed settings)

2. Turn on the power supply and set the timing time according to the machine surface scale. If it needs to work for a long time, set the timer to the "normally open" position.

3. Turn on the power switch and set the constant temperature:

(1) Set the small control switch to the "setting" section, and the temperature displayed on the display is the set temperature. Adjust the knob to set the temperature you need. (the working temperature set by you should be higher than the ambient temperature. At this time, the machine starts to heat up and the yellow indicator light is on, otherwise the machine will not work.)

(2) Place the small switch of the control part at the "measurement" end. At this time, the temperature displayed on the display screen is the actual temperature of the air in the test chamber. With the change of the air temperature in the box, the number displayed will also change accordingly.

(3) When heating to the temperature you need, the heating will automatically stop and the green indicator light will be on; when the heat emission in the test chamber is lower than the temperature set by you, a new round of heating will start again.

4. Turn on the oscillation device:

(1) Turn on the oscillation switch on the control panel, and the indicator light will be on.

(2) Adjust the oscillation speed knob to the desired oscillation frequency.

5. After work, cut off the power supply and set the speed control knob and temperature control knob to the lowest point.

6. Clean the machine and keep it clean.

4、 Notice of cha-s gas bath thermostatic oscillator
1. The appliance should be placed on a firm working table, and the environment should be clean and tidy with good ventilation.

2. The power socket provided by users should be well grounded.

3. It is strictly forbidden to move the machine during normal operation.

4. Do not hit the machine.

5. Children are not allowed to approach the machine to prevent accidents.

6. Make sure that the power supply has been cut off before replacing the fuse.

7. Please clean the machine after use, no water drop or dirt remains.


The main products of Runhua instruments include:

  A variety of digital display constant temperature biochemical, light incubator, refrigeration constant temperature oscillation incubator, digital display electrothermal constant temperature incubator, vacuum, blast drying oven, carbon dioxide incubator, constant temperature and humidity incubator, salt spray test chamber, water separation incubator, multi-functional refrigeration water bath, air bath oscillation shaker, various magnetic, electric, speed measuring multi-functional agitators, constant speed strong electric stirrer, high-speed and high-speed electric mixer Temperature digital display heat collecting stirrer, large capacity and high power magnetic stirrer, various water bath pots, super digital constant temperature circulating water tank, internal and external circulation oil bath pan, various high and low speed centrifuges, various water bath, gas bath digital display thermostatic oscillator, various reciprocating, gyratory oscillation shakers, extraction vertical purification oscillator, double-layer large multi-function oscillator, large-scale frozen air shaker, planting There are more than 100 kinds of laboratory instrument products, such as tissue mashing homogenizer, high-speed disperser, various digital display electric heating plate, constant temperature stage, micro oscillator, vortex mixer, penicillin rapid mixer, decolorizing shaker, low temperature vertical water tank, analysis and detection.

}
Video

    No video highlights...
Photo
No photo collection...
Customer
Flash Demo

Project
No related case...
Related articles
Related products
Consulting

Copyright 2020 Changzhou Runhua Electric Co., Ltd. Copyright Design by:EastNet [Manage]
Top