Constant speed oscillator intelligent control speed constant speed digital display timing manufacturers recommended superior quality

  Run Hua brand hy-5b digital display gyratory oscillator with constant speed, which adopts new material, new technology and new technology, makes the product fresh and easy to use. This instrument is suitable for the situation of chemical analysis and mixing of various samples evenly in scientific research institutions of health and epidemic prevention, environmental monitoring, colleges and universities, industrial and mining enterprises, etc. it is also suitable for the use of biochemical bacteria culture and oscillation. It has the characteristics of large capacity, low noise, light weight and small volume. It has adjustable speed and timing function.

1、 Details:

  Principle of constant speed cyclotron oscillator: the instrument uses the characteristics of permanent magnet brushless DC motor: by adjusting the voltage, the oscillation frequency of the instrument can be effectively changed to achieve the ideal oscillation speed. This machine has high speed measurement accuracy and LED digital display speed. The work should be placed on a flat table, and the ground wire should be properly connected when using.

2、 Usage of constant speed gyrotron oscillator:

  The panel is equipped with: power switch. When using, first align the timer knob from the line to the "on" normally open position, and then turn on the power switch. Please pay attention to setting the timing time, and then adjust the up and down touch buttons according to the oscillation frequency you need. The service life of the instrument can be prolonged if it is used at medium speed within the speed range. The container solution must not exceed one third, otherwise it must be capped.

3、 Specifications of constant speed gyrotron oscillator

1. Oscillation frequency: start-up -- 300 times / min
2. Oscillation amplitude: 20 mm
3. Power supply: 220 V ± 10 50 Hz
4. Power: 120W
5. Maximum load: 50kg
6. Working size: 450 * 360mm
7. Timing: 0-9999 minutes or hours
8. Ambient temperature: normal temperature
9. Relative humidity: < 85%
10. Weight: 20 kg
11. Working mode: Rotary
12. Constant speed range: start-up - 300rpm

4、 Note for gyrotron oscillator:

1. The instrument shell should be properly grounded to avoid accidents.
2. After the machine is used, turn off the power supply, put it in a ventilated and dry place, and keep it clean.

No video highlights...