Intelligent speed selection digital timing of td6a-ws brushless motor for desktop centrifuge

1、 Product introduction

  Time table centrifuge is a conventional laboratory centrifuge, which is widely used in biology, chemistry, medicine and other scientific research, education and production departments. It is suitable for radioimmunoassay monitoring and separation of cells and large particles. There are two kinds of timed and irregular centrifuges.

2、 Product features

  The machine adopts high-quality brushless DC motor and LED display. The centrifuge has no noise. The instrument is small and exquisite. It is easy to carry. The shell is made of high-quality environmental protection materials. It is solid and durable. There are four high-quality suction cups at the bottom. The speed and time can be set at will with microcomputer touch screen. The speed is constant and zero error. With automatic power-off protection device, with safety door lock. (there are two kinds of performance: high speed and low speed, which can be selected when purchasing)

3、 Main technical parameters

Working power supply: 220 V, 50 Hz

Maximum speed: 4000R / min (digital display can set the speed at will)

Speed accuracy: zero error

Centrifugal force: 2200xg

Rotor capacity: the following rotors can be used, regardless of the specific rotor number, subject to the purchased varieties. Rotor series: 10mlx12, 15mlx12, 15mlx6, 15mlx8, 20mlx6

Timing range: 1-99min

Net weight: 8kg

Overall dimension: 170 * 310 * 210mm

Drum diameter: ∮ 12.5cm

Control mode: microcomputer control LED display

Motor: brushless DC motor noise: ≤ 60dB (a)

4、 Safety notice:

  It is strictly prohibited to run without load without rotating head; check whether there is corrosion damage on the rotating head before operation; do not contact the rotating head in operation; do not operate under unbalanced loading condition.

5、 Instructions for use

  The working table of the centrifuge should be flat and solid, the workshop should be clean, dry and well ventilated, and the ambient temperature should be 5-32 ° C. start the centrifuge and wipe the rotating head clean. Load the weighing test tube, close the centrifuge cover, set the centrifugal time according to your own requirements, adjust the speed control knob to increase the required speed, The speed control knob must be set to the minimum position, the power switch should be turned off, the power supply should be cut off, the inner cavity and the rotating head should be wiped, and the centrifuge cover should be closed.

6、 Maintenance

  Do not place any objects on the centrifuge cover. After each use, be sure to clean and wipe the inner cavity and rotating head, and cover the centrifugal cover to prevent dust and dirt from entering. If the centrifuge has not been used for a long time, the centrifuge cover should be opened for a period of time before being used again, Dry inner cavity. The motor is brushless type, no maintenance. If you don't understand, please call our company, we will provide you with high quality service.

Changzhou Runhua Electric Appliance Co., Ltd
Address: Jintan Road, Changsheng, Jiangsu Province
Tel: 0519-82305398
Fax: 0519-82306938
Website: www. runhuayiqi.com
Email: 394514722@qq.com

No video highlights...