800-1 experimental centrifuge

  As a conventional laboratory instrument, electric centrifuge is widely used in biology, chemistry, medicine and other scientific research, education and production departments. It is suitable for radioimmunoassay identification and separation of cells and large particles. There are timing and timing, low speed and high speed, micro and large capacity, speed digital display and non digital display specifications for customers to choose.

Table type electric (low speed) centrifuge is suitable for qualitative analysis in hospital laboratories, clinics, biochemical laboratories and biological products laboratories, and is used for plasma, serum, urea and vaccine manufacturing.

Note: 800, 800-1, centrifuge shell is divided into plastic shell and metal shell, (clear when purchasing)

Parameter description of related series centrifuge：

1、 Brief introduction of 800-1 electric centrifuge:

  800-1 desktop electric centrifuge is a conventional laboratory centrifuge, which has the advantages of beautiful appearance, large capacity, small volume, light weight, low noise and small vibration. It is widely used in biology, chemistry, medicine and other scientific research, education and production departments, biochemical laboratory for qualitative analysis of plasma, serum, urea and vaccine manufacturing and other experimental teaching.

2、 Main parameters of 800-1 electric centrifuge:

1. Power supply: 220 V, 50 Hz

2. Maximum centrifugal force: 1685xg

3. Capacity: 20ml × 6

4. Maximum speed: 4000R / min

3、 Instructions for table type electric centrifuge:

This machine adopts three hole safety socket. The ground wire should be properly connected before use. When working, the machine should be placed on a flat and firm table. The specific operation must follow the following steps:

a. Open the cover plate and carefully place the specimen in the centrifuge tube. Note: the symmetrical centrifugal protective tube must be put into the tube and weighed with the same quality

The weight deviation of the test tube is no more than 1G.

b. Close the cover plate and adjust the speed to the required value (high speed starting is strictly prohibited)

c. Turn on the power and the centrifuge will work.

After the machine is used, turn off the switch, clean and wipe the inner cavity and rotating head, and cover the centrifugal cover. Put the machine in a dry, ventilated and cool place and keep it clean.

instructions:

  The working table of centrifuge should be balanced and fixed. The working room should be clean, dry and well ventilated. The ambient temperature should be 5 ~ prefix = st132 ℃. Before opening the centrifuge, wipe the rotating head clean, put the test tube with the same weight, close the centrifuge cover, adjust the speed control knob to increase the required speed (high speed start is strictly prohibited).

Maintenance:

  After each use, turn off the power supply, clean and wipe the inner cavity and rotating head, and cover the centrifugal cover. The carbon brush of the motor should be replaced in time after it is used for 5000 hours to avoid wearing the commutator. After long-term use, the natural wear of centrifuge is normal. After one year's use, if there is any fault or difficulty, our company will continue to provide high-quality service and help to deal with it.

No video highlights...