Td6a-ws digital display constant speed intelligent speed control centrifuge experiment recommended by manufacturers

1、 Product introduction

  Desktop centrifuge is a conventional laboratory centrifuge, which is widely used in biology, chemistry, medicine and other scientific research, education and production departments. It is suitable for radioimmunoassay monitoring and separation of cells and large particles.
There are two kinds of timing and non timing.

2、 Product features

  The machine adopts high-quality brushless motor, no noise, small and exquisite instrument, easy to carry. The shell is made of high-quality environmental protection materials, which is solid and durable. There are four high-quality suction cups at the bottom, which are stable. The speed and time are set at will by using microcomputer touch screen, and the speed is constant and zero error. Equipped with automatic power-off protection device (with high-speed and low-speed performance, optional when purchasing)

3、 Technical parameters                                               

Working power supply: 220V50Hz

Rotational speed: 0-4000r / min

Centrifugal force: 2325 × G

Working capacity: 10ml / 15mlx12 15mlx8 15ml X6 20mlx6

4、 Instructions for use

The working table of the centrifuge should be flat and solid, the workshop should be clean, dry and well ventilated, and the ambient temperature should be 5-32 ° C. start the centrifuge and wipe the rotating head clean

Put the test tube with the same weight, close the centrifuge cover, set the centrifugal time according to your own requirements, adjust the speed control knob to increase the required speed,

The speed control knob must be set to the minimum position, the power switch should be turned off, the power supply should be cut off, the inner cavity and the rotating head should be wiped, and the centrifuge cover should be closed.

It is strictly forbidden to operate without rotating head under no-load condition; before operation, check whether there is corrosion damage on the rotating head; do not contact the rotating head in operation

It is strictly forbidden to turn the head under unbalanced loading.

5、 Maintenance

  Do not place any objects on the centrifuge cover. After each use, be sure to clean and wipe the inner cavity and rotating head, and cover the centrifugal cover to prevent dust and dirt from entering. If the centrifuge has not been used for a long time, the centrifuge cover should be opened for a period of time before being used again, Dry inner cavity. The motor is brushless type, no maintenance. If you don't understand, please call our company, we will provide you with high quality service.

No video highlights...