Centrifuge 80-1 / 6x20ml

  80-1 series centrifuge is a conventional laboratory instrument, which is widely used in biological, chemical, pharmaceutical and other scientific research and education and production departments. It is suitable for radioimmunoassay identification and separation of cells and large particles. There are various specifications for customers to choose from: timing and non timing, low speed and high speed, micro and large capacity, speed digital display and non digital display. Electric centrifuge is a conventional laboratory instrument, which is widely used in biological, chemical, pharmaceutical and other scientific research, education and production departments. The highest speed of low-speed desktop centrifugation is 4000R / min, which is suitable for radioimmunoassay identification and separation of cells and large particles. Table type electric (low speed) centrifuge is suitable for qualitative analysis in hospital laboratories, clinics, biochemical laboratories and biological products laboratories, and is used for plasma, serum, urea and vaccine manufacturing.

Technical parameters:

Instrument model: 80-1
Working power supply: 220V50Hz
Maximum speed: 4000R / min
Maximum relative centrifugal force: 1685 × G
Working capacity: 20ml * 6

Parameters of related similar products:

Safety notice:

  Before operation, the instrument should be checked for corrosion damage, the centrifugal tube for damage, please do not contact the rotating head in operation, and it is strictly prohibited to operate under unbalanced loading of the rotating head.

instructions:

  The working table of the centrifuge should be balanced and fixed. The working room should be clean, dry and well ventilated. The ambient temperature should be 5 ~ 35 ℃. Before opening the centrifuge, wipe the rotating head clean, put the test tube with the same weight, close the centrifuge cover, adjust the speed control knob to increase the required speed (high speed start is strictly prohibited).

Maintenance:

  After each use, turn off the power supply, clean and wipe the inner cavity and rotating head, and cover the centrifugal cover. After long-term use, the natural wear of centrifuge is normal. After one year's use, if there is any fault or difficulty, our company will continue to provide high-quality service and help to deal with it.

No video highlights...