The speed of 80-2 desktop electric centrifuge is stable

80-2 desktop centrifuge

  The electric centrifuge is an experimental instrument for centrifugal separation. It uses the rotating centrifugal force to separate the substances in the solution by layers. The instrument adopts stepless speed regulation and automatic balance device, which has the advantages of stable operation, small volume, beautiful appearance, low temperature rise, high efficiency and wide applicability. Special aluminum alloy centrifugal turntable ensures that the centrifugal tube is not easy to be damaged. The instrument is widely used in hospitals, chemical and biochemical laboratories for qualitative analysis of serum, plasma and immunity.

technical parameter

Safety notice:

  It is strictly prohibited to run without load without rotating head; check whether there is corrosion damage on the rotating head before operation; do not contact the rotating head in operation; do not operate under unbalanced loading condition.

instructions

  The working table of the centrifuge should be flat and solid, the workshop should be clean, dry and well ventilated, and the ambient temperature should be 5-32 ° C. open the centrifuge to wipe the inner cavity and the rotating head. Put the test tube with the same weight, close the centrifuge cover, adjust the speed control knob to the required speed. Before each shutdown, the speed control knob must be set to the minimum position. The "timer" should be set to "zero" and the power switch should be turned off, Cut off the power supply, wipe the inner chamber and rotating head, and close the centrifuge cover.

80-2 low speed desktop centrifuge / electric centrifuge

[product introduction]

  The instrument is improved on the basis of 80-1. It has beautiful appearance, small volume, light weight, large capacity, and can control working time. It is easy to operate and easy to use. It is suitable for qualitative analysis of plasma, serum, urea and vaccine manufacturing in hospital laboratories and biochemical laboratories.

[usage]

  First of all, put the machine on a relatively flat and solid table, turn off all kinds of work switches, adjust the speed control knob to the lowest position, set the timer knob to the time you need, and then turn on the power switch, and gradually adjust from low speed to high speed to the working speed you need.

[precautions]

1. It must be grounded when using
2. When using, the plexiglass cover should be well covered to reduce noise and air resistance
3. The material added in the centrifugal tube should be relatively balanced, and the deviation should be less than 3 g / min

No video highlights...